Husqvarna TC 50 2023 Owner'S Manual Download

Page: 90 / 196

12 BRAKE SYSTEM

F03004-10

Main work

–

Remove screws

–

Take off cover

with washer

and membrane

H01654-10

–

Add brake fluid up to level

Guideline

Level

(brake fluid level

below reservoir rim)

10 mm (0.39 in)

Brake fluid DOT 4 / DOT 5.1 (

p. 137)

–

Position the cover with the washer and membrane.

–

Mount and tighten the screws.

Info

Clean up overflowed or spilled brake fluid immediately

with water.

Finishing work

–

Remove the motorcycle from the lift stand. (

p. 42)

12.14

Checking the brake linings of the rear brake

Warning

Danger of accidents

Worn-out brake linings reduce the braking effect.

–

Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcy-

cles workshop will be glad to help.)

F02204-10

(TC 50)

–

Check the brake linings for minimum thickness

Minimum thickness

≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the rear brake linings.

(

p. 89)

–

Check the brake linings for damage and cracking.
» If damage or wear is encountered:

–

Change the rear brake linings.

(

p. 89)

Summary of Contents for TC 50 2023





































































































































































































Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands

Husqvarna TC 50 2023, Owner'S Manual

Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands