Husqvarna TC 50 2023 Owner'S Manual Download Page 34

Page: 34 / 196

10 TUNING THE CHASSIS

10.5

Adjusting the high-speed compression damping of the shock absorber

(TC 50)

Caution

Risk of injury

Parts of the shock absorber will move around if the shock absorber is detached incor-

rectly.

The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be

glad to help.)

Info

The effect of the high-speed compression adjuster can be seen in fast compression of the shock

absorber.

F02184-11

–

Push the splash protector to the side.

–

Using an open end wrench, turn adjusting screw

clock-

wise all the way.

Info

Do not loosen fitting

–

Turn counterclockwise by the number of turns corresponding

to the shock absorber type.
Guideline

High-speed compression damping

Comfort

2.5 turns

Standard

2 turns

Sport

1.5 turns

Info

Turn clockwise to increase damping; turn counter-

clockwise to reduce damping.

–

Position the splash protector.

10.6

Adjusting the rebound damping of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will move around if the shock absorber is detached incor-

rectly.

The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be

glad to help.)

Summary of Contents for TC 50 2023





































































































































































































Search results

Summary of Contents for TC 50 2023

Reviews:

Husqvarna TC 50 2023, Owner'S Manual, Page: 34 / 196

Search results

Summary of Contents for TC 50 2023

Reviews: