Husqvarna TC 50 2023 Owner'S Manual Download

Page: 186 / 196

GLOSSARY

HANDLEBAR

- The metal bar attached to the front

end of the motorcycle that turns the front wheel for

steering. Many of the controls for the motorcycle are

located on the handlebar.

HELMET

- The most important protective clothing

to be worn when operating a motorcycle. It covers the

head and helps protect against skull fracture or brain

injury in an accident.

OFF-HIGHWAY or OFF-ROAD

VEHICLE

Any vehicle, including off-highway motorcycles and

ATVs, which is restricted by law from operating on

public roads.

OHM

- Off-Highway Motorcycle

PSI

- Refers to air pressure in the tires and stands for

“Pounds per Square Inch.”

READING THE TERRAIN

- Looking well ahead

while riding, anticipating hazards.

SHIFT LEVER

- On those motorcycles equipped with

a shift lever, it allows the operator to change gears. The

shift lever is operated by the left foot.

TAILPIPE

- That part of the exhaust system which

expels waste gases.

THROTTLE

- The control operated by the right hand

which controls the engine speed.

TRACTION

- Tread friction between the ground and

the tires.

TRANSMISSION

- Mechanism used to transmit

power from the engine to the wheels.

Summary of Contents for TC 50 2023





































































































































































































Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands

Husqvarna TC 50 2023, Owner'S Manual

Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands