Husqvarna TC 50 2023 Owner'S Manual Download

Page: 86 / 196

12 BRAKE SYSTEM

F02237-10

–

Position the brake caliper.

–

Mount and tighten screw

Guideline

Screw, brake linings

8 Nm (5.9 lbf ft)

–

Mount lock ring

–

Mount screw

, but do not tighten yet.

Guideline

Screw, front

brake caliper

M8x60

20 Nm (14.8 lbf ft)

Loctite

243™

–

Mount screw

, but do not tighten yet.

Guideline

Screw, front

brake caliper

M8x40

20 Nm (14.8 lbf ft)

Loctite

243™

–

Operate the hand brake lever repeatedly until the brake lin-

ings are in contact with the brake disc and there is a pressure

point. Secure the hand brake lever in the activated position.

The brake caliper straightens.

–

Tighten screw

Guideline

Screw, front

brake caliper

M8x60

20 Nm (14.8 lbf ft)

Loctite

243™

–

Tighten screw

Guideline

Screw, front

brake caliper

M8x40

20 Nm (14.8 lbf ft)

Loctite

243™

–

Remove the locking piece of the hand brake lever.

V02100-10

–

Correct the brake fluid level.
Guideline

Brake fluid level under top

level of container

5 mm (0.2 in)

Brake fluid DOT 4 / DOT 5.1 (

p. 137)

–

Position cover

with membrane

–

Mount and tighten screws

Info

Immediately clean up any brake fluid that has over-

flowed or spilled with water.

Finishing work

–

Remove the motorcycle from the lift stand. (

p. 42)

Summary of Contents for TC 50 2023





































































































































































































Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands

Husqvarna TC 50 2023, Owner'S Manual

Search results

Summary of Contents for TC 50 2023

Reviews:

Related manuals for TC 50 2023

Brands by name

Popular brands