Pandora Smart Moto Manual Download

Page: 1 / 56

Pandora would like to thank you

for choosing our service-security system

for motorcycles Pandora Smart Moto/Smart Moto Plus

Pandora Smart Moto / Smart Moto Plus

is a service-security system built for motorcycles and

quads with on-board voltage of 12V.

It is a complex engineering device, which includes unique and modern technological software and

hardware solutions. While developing we were using the most up-to-date electronics from world’s

best manufacturers. The device is built using high-precision mounting and control machinery; thus,

we guarantee highest possible quality, reliability and stable technical characteristics for the whole

operation period.

The system is built for your convenience: it’s ergonomic, reliable, has the highest security and service

characteristics, 3 years unconditional warranty and free service and support. We are happy to provide

any support we can – feel free to use our online support.

WARNING! I

STRONGLY

RECOMME NDED

HAVE

PROFESS IONAL

CAR

MECH ANI C

INSTALL

THE

SYSTEM

. A

CAR

ELECT RONICS

INSTALLER

SHOULD

ABLE

INSTALL

THE

SYSTEM

USING

INSTALLATION

SCHEME

THIS

MANUAL

AND

THE

LARM

TUDIO

ANDORA

PECIALIST

SOFT WAR E

. M

OST

FEATURES

ARE

HIGHLY

DEPE NDENT

COMPETE NT

INSTALLATION

. O

SYSTEMS

ARE

THOROUGHLY

TESTED

FOR

QUALITY

FEATURE

FAILS

PRODUCE

EXPECTED

RESULT

MOST

LIKELY

THE

PROBLEM

IMPROPER

INSTALLATION

This device has limited external factors resistance. It should not be subjected to water beyond occasional splatter.

The base unit is designed to operate at temperatures from -40°C to +85°, the degree of protection is IP54.

The control units (remotes, tags, etc.) are designed to operate at temperatures from -10°C to +40°C, the degree of protection is IP40.

See wiring diagram to find information about additional devices and options.

Our web-site: pandorainfo.com

Customer support: [email protected]

Product is in conformity with Electromagnetic Compatibility

Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC

Summary of Contents for Smart Moto

























































Search results

Summary of Contents for Smart Moto

Reviews:

Related manuals for Smart Moto

Brands by name

Popular brands

Pandora Smart Moto, Manual

Search results

Summary of Contents for Smart Moto

Reviews:

Related manuals for Smart Moto

Brands by name

Popular brands