background image

Identification  Data

Description

1.  Technical  Specifications......................1
2.  Location  of  Parts.................................2
3.  How  to  Ride  Motorcycle.....................9 
4.  Safe  Riding  Tips..................................10
5.  Daily  Safety  Checks............................ 11
6.  Running  In  Instruction......................... 12

7. Periodic  Maintenance  Information............13
8. Periodic  Maintenance  &  Lubrication........ 15
9. Periodic  Part  Replacement  Schedule...... 17
10.  Pre  Delivery  Inspection............................ 18
11.  Applicable  to  Periodic  Services.............. 19 
12. Non-use  Maintenance.............................. 20

Notice: 

The  description  and  illustration  in  this  booklet  are  not  to  be  taken  as  binding  on  the 

manufacturers.

 

The  essential  features  of  the  type  described  and  illustrated  herein  remaining 

unaltered.  Bajaj  Auto  Limited  reserves  the  right  to  carry  out  at  any  moment  without  being 
obliged  to  bring  this  booklet  upto-date.  Modifications  on  the  vehicle,  parts  or  accessories 
as may be convenient and necessary.

Safety and Warning information :
Warning : 

This indicates that a potential hazard or injury to you or other persons & to the    

vehicle can happen if advice provided is not followed 

Caution  : 

This  indicates  that  a  potential  hazard  that  could  result  in  vehicle  damage.  Follow 

the Advice provided with the caution.

Summary of Contents for BM 100












Reviews: