Husqvarna 2011 SMS 630, Workshop Manual

Page: 366 / 455

M.15 Part. N. 8000 H2051 (02-2010)
ELECTRICAL SYSTEM
STARTING SYSTEM INSPECTION
Starter motor removal
Remove the starter motor as described in Section "F".
Starter motor inspection
Whenever a starter motor fault is detected, check the starter motor as follows:
- connect a meter across ground and starter motor contact;
- check for continuity between the positive pole and motor ground. If no
continuity is found, replace the starter motor.
Starter motor
Rated voltage: 12V
Current draw: 700 W
No-load test
Voltage: 11.5 V
Current: 22 A
Speed: 7000 rpm
Cranking test
Voltage: 8.5 V
Current: 165 A
Torque: 1.86 Nm - 0.19 Kgm - 1.33 ft/lb