3
Uncoupling
56
Operation
Procedure:
Activate the parking brake of the trailer
an the parking brake of the towing
vehicle.
Secure the trailer against rolling by
using the wheel chocks.
Extend the leg of the spindle support
all the way to the substrate or until the
trailer is more or less balanced and
the towing ring is slightly lifted by the
yoke bar.
Disconnect the cables from the towing
vehicle in the following sequence:
1. Supply line (red)
2. Brake line (yellow)
3. Lighting cable
4. EBS / ABS cable
5. or hydraulic line
(see Decoupling" on page
).
Safely stow the cables on the tubular
drawbar or the console.
Release and open the bolt coupling on
the towing vehicle.
Only drive the towing vehicle forwards
once there are no more persons in the
danger area.
Close the bolt coupling.
Carry out a check when parking
(see page
).
Summary of Contents for 10000 Series
