Humbaur 10000 Series, Operating Instructions Manual

Page: 210 / 230

7
Cleaning / care
208 Inspection, care and maintenance
High-pressure cleaner
NOTICE
Cleaning with a high-pressure
cleaner!
Components / surfaces that are directly
blasted with too high pressure, too short
distance or too high water temperatures
may get damaged.

Do not direct the water jet directly onto
the:
- Name plate
- EBS/ABS system plate,
- Seals,
- Electronic components / distribution
boxes,
- Plug connectors,
- Screw-type cable connections /
cables,
- Piston surfaces / extensions and
scrapers of the telescopic cylinder,
- Oil / fuel container cap,
- Brake and hydraulic hoses,
- Batteries,
- Voltage converters.
Please consider the following points
when cleaning with a high-pressure
cleaner:

Read the operating
instructions of the manufacturer.

Lubricate all lubrication points until
they exude grease before cleaning.

Use , , .

Always move the water jet while
cleaning.

Only use high-pressure cleaners that
are limited to a maximum pressure of
50 bar and a maximum temperature of
80 °C.

Keep a minimum distance between
the high-pressure nozzle and the
cleaning object - for round jet nozzles
approx. 700mm, for 25° flat jet nozzles
and dirt blasters approx.
300 mm.

Do not user round jet nozzles to clean
tyres and the tarpaulin. Hard water
jets may damage the tyres or the
tarpaulin.
Cleaning the aluminium disc
wheels

Regularly wash the aluminium disc
wheels, particularly after activities
such as:
- Transports of alkaline materials,
- in winter, when the roads are treated
with grit.
Aluminium disc wheels do not need
special maintenance apart from
occasional polishing.