14
Safety
Service and warranty claims
1
The warranty includes the
following:
Defects that occur during proper use of the trailer
as specified, or which are design-related or can
be attributed to material faults.
Repairs carried out during the guarantee period
do not extend it.
As the contracting party, the dealer is respon-
sible for the warranty.
Requirements
Original replacement parts must be used for
repairs.
Repairs must be carried out by a specialist
workshop.
The maintenance instructions and regulations of
the manufacturer as listed in this operating
manual must be observed.
Defects must not be attributable to
Non-compliance with the technical and legal
regulations listed in this operating manual.
Improper use of the trailer or lack of experience
on the part of the user.
Unauthorised alterations to the trailer and the
use of fittings not approved by Humbaur GmbH
invalidate the warranty. Non-compliance with the
relevant statutory regulations.
The following are not defects
Each trailer is a hand-made product. Despite the
greatest of care, minor superficial scratches
which have no effect on the intended use can
occur during assembly.
Tension cracks in the surface (hair cracks) are
inherent in the production method and cannot be
avoided. These hair cracks have no impact on
the stability or use of the trailer.
Gaps between the drop side and the loading
bridge.
Furthermore, polyester components are not
100% colour-fast. Here, too, UV and weather
effects can cause fading.
It should also be noted that rubber parts gener-
ally age as a result of UV exposure and the
formation of cracks and fading of the surface is
possible.
Parts coated with the cathodic dip-painting
process (KTL) are not colour-fast. They can fade
as a result of UV irradiation.
Galvanised parts are not normally shiny, as they
lose their bright finish after a short time. This is
not a defect but rather a desired effect, as full
protection against rusting of the metal is only
guaranteed after oxidation. Wood is a natural
material. Despite the most diverse types of
processing and coating, it is therefore subject to
natural, weather-dependent expansion and
shrinkage, which can result in warping. Natural
wood grain and irregularities are normal for this
natural material and can appear on the surface.
Fading is also possible as a result of UV irradia-
tion and weathering effects. A manufacturing
tolerance is specified for the thickness of the
wooden components used. Claims will not be
accepted for deviations within the tolerance.
As the trailers are not generally insulated,
temperature fluctuations can result in the forma-
tion of condensation under tarpaulins and poly-
ester covers. In this case, adequate ventilation
should be provided to prevent mould growth.
Furthermore, the trailers are not 100% water-
tight. Water ingress at the doors, flaps and
windows is still possible, even with extremely
careful workmanship and the use of rubber
seals.
Summary of Contents for 10000 Series
