Humbaur 10000 Series, Operating Instructions Manual

Page: 85 / 230

4
Support device
Operating the chassis 83
Spindle support in support position
Pic. 45 Releasing the hand crank
1 Crank handle
2 Safety cable with snap hook
3 Hand crank
Releasing the hand crank

Release the snap hook (Pic. 45 /2) on
the safety cable.

Release the safety cable from the
hand crank (Pic. 45 /3).

Swivel out the crank handle
(Pic. 45 /1).
Pic. 46 Activate quick / load gear
1 Hand crank
2 Crank shaft
3 Gearbox
Activating the quick gear

Pull out the hand crank (Pic. 46 /1).
Quick gear is activated.
Activate the load gear

Push in the hand crank so that the
gear selection arrester in the bear box
latches.
Load gear is activated.
Pic. 47 Turn the crank to lower the support
foot
1 Hand crank
2 Support leg
Lowering the support foot

Turn the crank to lower the support
foot (Pic. 47 /2) - in quick gear - until it
is almost in contact with the ground.

Switch to the load gear.

Wind down the support foot until it
reaches the floor.

Compensate for uneven ground as
required, so that the trailer is
horizontally aligned.

Secure the hand crank as required -
see (Pic. 45 ).
F - 027
1
2
3
F - 028
3
1
2
F - 028
2
1