Humbaur 10000 Series, Operating Instructions Manual

Page: 199 / 230

7
Emergency release device for the accumulator parking accumulator
Inspection, care and maintenance 197
Emergency release device
Pic. 73 Accumulator brake membrane
cylinder
1 Release screw, parked
2 Sealing cap (hole)
In driving mode, the release screw
(Pic. 73 /1) is attached to a mounting
intended for that purpose.
The sealing cap (Pic. 73 /2) closes the
hole in the lid of the accumulator brake
membrane cylinder.
Releasing the parking brake
Pic. 74 "Keyhole"
1 Release screw

Insert the release screw (Pic. 74 /1)
through the hole in the lid into the
"keyhole".

Turn the release screw by 90°.

Slide on the washer (Pic. 75 /1).

Turn the hexagonal nut (Pic. 75 /2)
onto the release screw (Pic. 75 /3).

Turn it further, so that the release
screw is pulled outwards.
Deactivate the emergency release
function
Pic. 75 Release the spring
1 Washer
2 Hexagonal nut
3 Release screw
4 Sealing cap

Remove the hexagonal nut
(Pic. 75 /2) by turning it.

Remove the washer (Pic. 75 /1).

Turn the release screw (Pic. 75 /3) by
90° and remove it.

Attach the loosening screw to the
membrane cylinder in the mounting
intended for that purpose
(see Pic. 73 ).

Close the hole with the sealing cap
(Pic. 73 /2).
W - 054
1
2
W - 055
1
W - 056
1
3
4
2