Humbaur 10000 Series, Operating Instructions Manual

Page: 77 / 230

4
Hydraulic supply
Operating the chassis 75
Coupling
Pic. 25 Hydraulic line, connection
1 Plug-in coupling
2 Towing vehicle connection socket

Ensure that the line connection is
clean (Pic. 25 /1).

Clean the line connection with a clean
cloth as required.

If required, check the hydraulic oil
level of your towing vehicle.

Insert the line connection in the
connection socket (Pic. 25 /2) of the
towing vehicle.
The pressure is built up by starting the
towing vehicle.
Tipping the cargo bed
Pic. 26 Cargo bed tipped
1 Towing vehicle
2 Loading bridge
3 Hydraulic connection
The loading bridge is controlled from the
operating unit on the towing vehicle.

Before tilting the loading bridge,
ensure that the trailer is coupled to the
traction unit and secured, so that it
cannot roll away.

Ensure that the tilting bearings have
been correctly attached in the required
position and secured.
Uncoupling
Pic. 27 Hydraulic line, parking
1 Protective cap
2 SVK BG3 plug-in coupling
The hydraulic line may not be
under pressure when it is
uncoupled.

Remove the line connection from the
connection socket of the towing
vehicle.

Close the plug-in coupling (Pic. 27 /2)
with a protective cap (Pic. 27 /1) as
required.

Stick the hydraulic lines onto the
parking console or carefully place
them onto the tubular drawbar.
F - 009
2
1
F - 010
1 2
3
F - 011
1 2