manualshive.com logo in svg

Huawei OptiX OSN 550, Configuration Manual, Page: 29 / 470

Share
Download
Huawei OptiX OSN 550 Configuration Manual Download Page 29

Button

Functionality

Allows the user to view and select the board
ports.

Deletes the selected data or icon.

Closes the operation wizard.

Creates a new service, protection or physical
inventory information etc.

Proceeds to the next step.

Returns to the previous step.

Closes the dialog box.

Expands the Object Tree.

Collapses the Object Tree.

Makes the current setting effective and closes
the dialog box.

Cancels the current setting and closes the
dialog box.

Search the correlative information.

Sets the correlative condition.

 

1.2.4 Shortcut Icon

This topic describes the shortcut icons on the Main Topology.

You can customize the toolbar so that only the frequently-used buttons are displayed on the
toolbar. To customize the toolbar, right-click the toolbar and choose a menu item from the
shortcut menu.

Button

Name

Description

Favorites Folder

Adds the commonly used functions to
the favorites folder.

Exit

Exits from the client.

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

1 Getting Started

Issue 02 (2011-06-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

1-9

Summary of Contents for OptiX OSN 550























































































































































































































































































































































































































































































Reviews:

No comments