manualshive.com logo in svg

Huawei OptiX OSN 550, Configuration Manual, Page: 132 / 470

Share
Download
Huawei OptiX OSN 550 Configuration Manual Download Page 132

Prerequisite

l

The physical network topology must be set up.

l

NEs, boards, and fibers must be successfully created on the U2000.

l

The operator must understand the information provided in 

3.8.2 Signal Flow and Timeslot

Allocation

.

Procedure

Step 1

Choose 

Service

 > 

SDH Trail

 > 

Create SDH Trail

 from the Main Menu.

Step 2

Create a VC4 server trail.
1.

Set associated parameters as follows. Set 

Level

 to 

VC4 Server Trail

, and take default

values for other parameters.

2.

Double-click the source NE (NE1) and sink NE (NE3) on the right of the Main Topology,
and set up a VC4 server trail from NE1 to NE3 via NE2.

a.

On the 

Route Constraint

 tab, right-click 

Explicit Node

, and then choose 

Add

.

b.

In the 

Add Explicit Node

 dialog box that is displayed, set 

Type

 and 

What

 for

configuring the pass-through node NE2.

c.

Click 

OK

. The VC4 server trail is sure to stretch from NE1 to NE3 via NE2

3.

Click 

Apply

. Then, click 

Close

 in the 

Operation Result

 dialog box indicating that the

operation succeeded.

4.

Optional: 

In the 

Operation Result

 dialog box indicating that the operation succeeded,

click 

Browse Trail

 to query the created VC4 server trail.

Step 3

Set up a protection VC4 server trail using the same method as setting up a VC4 server trail.
During the setup of a protection VC4 server trail, ensure that the originated node is NE1, the
terminated node is NE3, and the pass-through node is NE4.

Step 4

Create VC12 services.
1.

In 

Create SDH Trail

, set associated parameters as follows. Set 

Level

 to 

VC12

, and take

default values for other parameters.

2.

Double-click the source NE (NE1) on the right of the Main Topology. The 

Select Board

Port-Source

 dialog box is displayed. Select the required SP3D board and 

Tributary

Port

, and then click 

OK

.

3 Configuring SDH Services

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

3-50

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

Summary of Contents for OptiX OSN 550























































































































































































































































































































































































































































































Reviews:

No comments