manualshive.com logo in svg

Huawei OptiX OSN 550, Configuration Manual, Page: 235 / 470

Share
Download
Huawei OptiX OSN 550 Configuration Manual Download Page 235

User

Parameter

Value in
This
Example

Description

Sink Port

VCTRUN
K1

When creating the bidirectional Ethernet
service from a PORT to a VCTRUNK, it is
recommended that you use a specific
VCTRUNK as the sink port. In this example,
VCTRUNK1 is the internal port used by the
service between user E1 and user E2.

Sink C-
VLAN (e.g.
1, 3-6)

200

According to the plan, the VLAN ID is set to
200 on the transmission network side for
Ethernet service between user E1 and user E2.

 

4.

Configure the cross-connections from the Ethernet services to the SDH links for user D1
and user E1.

l

In the NE Explorer, select NE1 and then choose 

Configuration

 > 

SDH Service

Configuration

 from the Function Tree.

l

Click 

Create

 on the lower-right pane to display the 

Create SDH Service

 dialog box.

Set the parameters as follows.

User

Paramete
r

Value in
This
Example

Description

User D1

←→

user D2
user E1

←→

user E2

Level

VC12

The timeslots bound with the service
between user D1 and user D2 and the
service between user E1 and user E2 are at
the VC-12 level. The service level must be
consistent with the level of the paths bound
with the VCTRUNK.

Service
Direction

Bidirectiona
l

The service between user D1 and user D2
and the service between user E1 and user
E2 are bidirectional services.

Source Slot 4-EFS8-1

(SDH-1)

When you create a bidirectional SDH
service from an Ethernet board to a line
board, it is recommended that you set the
slot of the Ethernet board as the source slot.

Source
VC4

VC4-4

The value range of 

Source VC4

 is

consistent with the value range of

Available Resources

, which is set for the

paths bound with VCTRUNK1. In this
example, 

Source VC4

 is set to 

VC4-4

.

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

4 Configuring Ethernet Services

Issue 02 (2011-06-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

4-81

Summary of Contents for OptiX OSN 550























































































































































































































































































































































































































































































Reviews:

No comments