manualshive.com logo in svg

Huawei OptiX OSN 550, Configuration Manual, Page: 142 / 470

Share
Download
Huawei OptiX OSN 550 Configuration Manual Download Page 142

1.

Choose 

Service

 > 

SDH Trail

 > 

Create SDH Trail

 from the Main Menu.

2.

Set associated parameters as follows. Set 

Level

 to 

VC4 Server Trail

, and take default

values for other parameters.

3.

Double-click NE3 and NE4 on the right of the Main Topology, select the trail from NE3
to NE4 as the working, VC-4 server trail, and click 

Close

. In the 

Operation Result

 dialog

box indicating that the operation succeeded, click 

Close

.

4.

Optional: 

In the 

Operation Result

 dialog box indicating that the operation succeeded,

click 

Browse Trail

 to query the created VC4 server trail.

Step 2

Create a protection VC-4 server trail, using the method described in 

Step 1

.

NOTE

When creating a protection VC-4 server trail, double-click NE3 and NE4 on the right of the Main Topology,
and ensure that the traffic direction is NE3-NE2-NE1-NE4.

On the 

Route Constraint

 tab, click the 

Explicit Node

 tab, right-click in the blank area, and then choose

Add

 from the shortcut menu. In the 

Add Explicit Node

 dialog box that is displayed, set 

Type

 and 

What

for configuring the pass-through node NE2, and then click 

OK

.

Step 3

Create a VC-4 server trail without a protection chain.
1.

In 

Create SDH Tail

, configure the parameters as follows. Set 

Level

 to 

VC4 Server

Trail

, and take default values for other parameters.

2.

Double-click NE4 and NE5 on the right of the Main Topology, and click 

Apply

. Then,

click 

Close

 in the 

Operation Result

 dialog box indicating that the operation succeeded.

3.

Optional: 

In the 

Operation Result

 dialog box indicating that the operation succeeded,

click 

Browse Trail

 to query the created VC4 server trail.

Step 4

Create VC12 services after setting up a VC-4 server trail.
1.

In 

Create SDH Tail

, configure associated parameters as follows. Set 

Level

 to 

VC12

, and

take default values for other parameters.

3 Configuring SDH Services

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

3-60

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

Summary of Contents for OptiX OSN 550























































































































































































































































































































































































































































































Reviews:

No comments