manualshive.com logo in svg

Huawei OptiX OSN 550, Configuration Manual, Page: 194 / 470

Share
Download
Huawei OptiX OSN 550 Configuration Manual Download Page 194

User

Parameter Value in

This
Example

Description

Av
aila
ble
Ti
mes
lots

VC12-1 to
VC12-10

Ten VC-12s need to be bound for the service
from user B1 to user B2. In this example, the
first to the tenth VC-12 need to be selected in
sequence.

 

3.

Configure the cross-connections from the Ethernet services to the SDH links for user A1
and user B1.

l

In the NE Explorer, select NE1 and then choose 

Configuration

 > 

SDH Service

Configuration

 from the Function Tree.

l

Click 

Create

 on the lower-right pane to display the 

Create SDH Service

 dialog box.

Set the parameters as follows.

User

Paramete
r

Value in
This
Example

Description

User A1

Level

VC12

The timeslot bound with the service of user
A1 is at the VC-12 level. The service level
must be consistent with the level of the path
bound with the VCTRUNK.

Service
Direction

Bidirectiona
l

The service of user A1 is a bidirectional
service.

Source Slot 3-EGT1-1

(SDH-1)

When you create a bidirectional SDH
service from an Ethernet board to a line
board, it is recommended that you set the
slot of the Ethernet board as the source slot.

Source
VC4

VC4-4

The value range of 

Source VC4

 is

consistent with the value range of

Available Resources

, which is set for the

paths bound with VCTRUNK1. In the case
of VCTRUNK1, the value of 

Available

Resources

 is VC4-4.

Source
Timeslot
Range(e.g.
1,3-6)

1-5

The value range of the source timeslot is
consistent with the value range of

Available Timeslots

, which is set for the

paths bound with VCTRUNK1. In this
example, the value range of 

Available

Timeslots

 is from VC12-1 to VC12-5.

Sink Slot

5-SL4D-1
(SDH-1)

When you create a bidirectional SDH
service from an Ethernet board to a line
board, it is recommended that you set the
slot of the line board as the sink slot.

4 Configuring Ethernet Services

OptiX OSN 550 Multi-Service CPE Optical Transmission

System

Configuration Guide

4-40

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 02 (2011-06-30)

Summary of Contents for OptiX OSN 550























































































































































































































































































































































































































































































Reviews:

No comments