FusionModule5000 Smart Modular Data Center
Commissioning Guide
6 Commissioning the Management System
Issue 06 (2020-03-20)
Copyright © Huawei Technologies Co., Ltd.
88
----End
6.6.5.3 Commissioning a Camera (LAN Switch Networking Scenario)
If the camera web version is IPC V200R003C00, refer to this topic to commission the camera.
6.6.5.3.1 Commissioning IPC6325 Cameras
Prerequisites
If multiple cameras are accessed, retain the connection of one camera and disconnect
connections from other cameras. After commissioning the connected camera, commission
other cameras in the same way.
Procedure
Step 1
Log in to the camera WebUI.
1.
Configure the PC IP address and the camera IP address in the same network segment.
Enter the camera IP address (192.168.0.120 by default) in the address bar of the Internet
Explorer and press
Enter
button.
The following lists the operating system and browser supported for logging in to the camera through the
WebUI.
Support Windows 7: Internet Explorer 8/9/10/11. Chrome 32+, and FireFox 35–51
Support Windows 8: Internet Explorer 10/11, Chrome 32+, and FireFox 35–51
Support Windows 10: Internet Explorer 11, Chrome 32+, and FireFox 35–51
Google Chrome 45 or later versions need to install the Internet Explorer tab plug-in.
Only 32-bit web browsers are supported.
2.
Enter the preset user name
admin
and the preset password
HuaWei123
, and click
Log
In
.
Step 2
For details about how to commission IP cameras and set parameters for them, see the
documentation delivered with the equipment or obtain the documentation by referring to the
"Preparing Documentation" section.
1.
Preview the site situation in real time and check the camera coverage through videos.
Adjust the lens if necessary.
2.
Choose
Settings
>
Network Configuration
>
Network Parameters
, and set
IPv4
address
,
IPv4 Subnet mask
, and
IPv4 Gateway address
for the camera according to
the site plan.
3.
Choose
Settings
>
Video/Audio/Image
>
Video Settings
, and set
IP address
,
Subnet
mask
, and
Gateway IP address
for the camera according to the site plan.
Set coding protocol to H.265.
