FusionModule5000 Smart Modular Data Center
Commissioning Guide
6 Commissioning the Management System
Issue 06 (2020-03-20)
Copyright © Huawei Technologies Co., Ltd.
100
If
Apply to all cabinets
is selected, all other cabinets use this configuration.
If
Clear the power distribution configuration of all cabinets
is selected, the power distribution
configuration of all cabinets will be cleared.
Step 5
Click
Finish
after checking that electricity has been configured for all IT cabinets, network
cabinets, and smart cooling products.
The electricity needs to be configured manually for the devices that are not in the default electricity
configuration range based on the actual situation. Take lighting power supply for example. Choose
Monitoring
>
Power Distribution
>
General Input Unit1
>
Power Distribution Unit
>
Running
Parameters
>
Branch Output Configuration
, and set
Branch Output Configuration
to
LED
based
on the actual cable connection. Select the branch output configuration and set corresponding parameters
for other power distribution devices based on the actual cable connection.
Step 6
Click
Exit Edit Mode
to exit the view editing page of the smart module.
Step 7
Choose
Monitoring
>
Cabinet
, and set
Cabinet load factor overhigh alarm threshold
(default value: 90) on the
Running Parameters
page. If the default value is used, an alarm
will be raised when the power load factor of the power distribution devices in the smart
module exceeds 90%.
The alarm hysteresis is 5% by default. That is, if the cabinet load factor overhigh alarm threshold is 90%,
the raised alarm will be cleared when the load factor drops to a value smaller than 85%.
----End
6.6.6.2 Querying Power Parameters
Prerequisites
Power distribution devices are successfully connected to the ECC800.
Procedure
Step 1
Log in to the ECC800 WebUI as the administrator.
Step 2
Query the power usage information about each cabinet, such as the power (kW), power
consumption (kWh), and load factor (%).
Figure 6-40
Power usage information
Step 3
View the IT power information about the smart module.
