FusionModule5000 Smart Modular Data Center
Commissioning Guide
6 Commissioning the Management System
Issue 06 (2020-03-20)
Copyright © Huawei Technologies Co., Ltd.
73
Prerequisites
A maximum of eight access actuators are supported.
When the fingerprint reader is connected to the ECC800 for the first time, the
permissions need to be synchronized.
Procedure
Step 1
Set the access user management and access permission management.
1.
Choose
System Settings
>
Access Management
to access the access management page.
The system supports the management of various access permissions through the access
card, password, and fingerprint.
2.
On the
Authorization Operations
tab page, click
Add
to access the new user page. On
the
Basic Info
tab page, enter
User name
and
Employee ID
.
Specify the following information on the
Password
tab.
−
Password: Enter and confirm the password.
−
Card number: The card number can be recorded directly or by swiping the card.
Record directly: Type the access card number in the text box.
Record by swiping the card: Click
Swipe Card
and place the card on the
access control device. The card number is automatically recorded.
−
Fingerprint: On the
Fingerprint
tab page, select
Fingerprint
for
Select fingerprint
reader
and click
Collect
. On the
Please collect fingerprint
page, click
OK
. Then
put your finger on the fingerprint reader to collect the fingerprint after hearing the
voice prompt. After you hear a beep sound, move your finger away and collect the
fingerprint again.
Each fingerprint should be recorded three times.
A maximum of three fingerprints from different fingers can be recorded.
