IT3/IT5
Connector System
PWB
A
SSEMBLY
N
OTES
Document Number:
ETAD-F0458
Revision 3.10
Page
30
of
73
Removable metal cap
on 300 pos receptacle
17
Φ
15
For IT3 series, the 300 position receptacle has a metal cap that is easy to remove after reflow,
as shown in Section 7.10. The 200 and 100 position receptacles have adhesive tape which has
a 3mm margin without adhesive for easy removal.
For IT5 series, the 300 position receptacle has the same metal cap as the IT3 one. The 200 and
100 position receptacles have adhesive tape which has margins on top and bottom for
removal.
6.5 Component Weight
Contact
Positions
Part
Number
Solder Ball
Material
Weight
100
IT3M/D-100S-BGA(37/39)
Pb-free (SAC 305) solder
2.5 g
IT3M/D-100S-BGA(57)
Eutectic SnPb solder
IT5M/D-100S-BGA(37/39)
Pb-free (SAC 305) solder
2.7 g
IT5HM/HD-100S-BGA(37/39)
Pb-free (SAC 305) solder
3.5 g
200
IT3M/D-200S-BGA(37/39)
Pb-free (SAC 305) solder
4.7 g
IT3M/D-200S-BGA(57)
Eutectic SnPb solder
IT5M/D-200S-BGA(37/39)
Pb-free (SAC 305) solder
5.2 g
IT5HM/HD-200S-BGA(37/39)
Pb-free (SAC 305) solder
6.7 g
300
IT3M/D-300S-BGA(37/39)
Pb-free (SAC 305) solder
9.1 g
IT3M/D-300S-BGA(57)
Eutectic SnPb solder
IT5M/D-300S-BGA(37/39)
Pb-free (SAC 305) solder
9.9 g
IT5HM/HD-300S-BGA(37/39)
Pb-free (SAC 305) solder
12.8 g
6.6 Vision and Alignment
Pick and place vision systems should
inspect all balls
and use best practices available for
image capture/analysis and centering.
Nov.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
