IT3/IT5
Connector System
G
ENERAL
I
NFORMATION
Document Number:
ETAD-F0458
Revision 3.10
Page
2
of
73
1.3 Application and Interpretation
This technical bulletin is intended to offer only general guidance and design concepts to
customers. Therefore, it does not limit customer designs nor guarantee results under all
situations. Development of actual designs is the responsibility of each customer. Customers
should consult with Hirose regarding their specification, when, or if, any questions arise relating
to these guidelines. Use of this technical bulletin is at customer’s sole risk. This bulletin is
provided
“AS IS”
and without warranty of any kind and Hirose
EXPRESSLY DISCLAIMS ALL
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. HIROSE DOES NOT WARRANT THAT THE
GUIDELINES CONTAINED IN THIS BULLETIN WILL MEET ANY CUSTOMER’S REQUIREMENTS.
FURTHERMORE, HIROSE DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE
OR THE RESULTS OF THE USE OF INFORMATION CONTAINED IN THIS BULLETIN IN TERMS OF
CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. UNDER NO CIRCUMSTANCE SHALL HIROSE OR
ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, BUSINESS
INTERRUPTION, LOSS OF BUSINESS INFORMATION AND THE LIKE) ARISING OUT OF THE USE OF THE
INFORMATION CONTAINED IN THIS BULLETIN.
Nov.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.