IT3/IT5
Connector System
S
YSTEM
D
ISASSEMBLY
Document Number:
ETAD-F0458
Revision 3.10
Page
71
of
73
The daughter ca rd should be
lifted straight up
off the interposers .
To
minimize unnecessary flexing
of the daughter ca rd, the removal
forces should be a pplied as
close to the interposer as possible
wi thout contacting any components. On densel y popula ted
assemblies, the edges ma y be the onl y open a rea tha t can be grasped.
13.2 Interposer Removal
The IT3 interposer is secured onto the mounting recepta cle wi th snap fit tabs , shown below:
The IT3 interposer is secured onto the mounting recepta cle also wi th other snap fi t tabs , shown
below. The IT5 interposer uses this mechanism solel y.
Locking Latch
Mounting side
Nov.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
