IT3/IT5
Connector System
PWB
A
SSEMBLY
N
OTES
Document Number:
ETAD-F0458
Revision 3.10
Page
27
of
73
All Hirose
IT3/IT5
standard receptacles are 6mm tall and IT5H +1mm receptacles are 7mm tall.
They require no special modifications to vision or placement routines to accommodate
differrent component heights if using all standard or +1mm receptacles. They are shipped in
JEDEC trays with pick and place tape attached on 100 and 200 position receptacles, and metal
cap attached on 300 position receptacles. Orientation is indicated on the receptacles and trays
by a chamfered corner.
Unless specifically mentioned, IT3 and IT5 share the same capability and requirement.
6.1 Packaging
Since receptacles have solder balls, receptacle trays will be sealed inside a bag with deoxidizing
agent and desiccant. Please do not mount these receptacles after 4 weeks of opening the bags
according to J-STD-0208, MSL2A in IPC/JEDEC standards. Receptacles comply with JEDEC
standards (JEDEC PUBLICATION 95, DESIGN GUIDE 4.10).
The expiration time for receptacles within close bags is 12 months (or one year) from the
delivery date when the effect of deoxidizing agent and desiccant is gone. If an operator
repackages and reseals receptacles within 12 hours, that will allow receptacles to get back into
store-able condition and be stored for total of 12 months. The desiccant should have minimal
amount of exposure to the air during repackaging. The bag provided is rated for 12 months.
Representative packaging for IT3 receptacles
Representative packaging for IT5 receptacles
Section 6 Pick and Place
Nov.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
