Shenzhen Hpmont Technology Co., Ltd.
Chapter 6 Function Introduction
HD3Z Series User Manual V1.2
-27-
Ref. Code
Function Description
Setting Range [Default]
d00.53
Motor humidity (%rm)
[Actual value]
d00.54
Motor temperature (°C)
[Actual value]
d00.55
Total power up time (h)
[Actual value]
d00.56
Total running time (h)
[Actual value]
d00.57
Total energy consumption high bit of motor (k kW.h)
[Actual value]
d00.58
Total energy consumption low bit of motor (kW.h)
[Actual value]
d00.59
Present energy consumption high bit (k kW.h)
[Actual value]
d00.60
Present energy consumption low bit (kW.h)
[Actual value]
d00.61
Present fault
[Actual value]
Display 100: Means under-voltage.
6.1.2
d01: Timing Display Parameter
Ref. Code
Function Description
Setting Range [Default]
d01.00
Present year
[Actual value]
d01.01
Present MM/DD
[Actual value]
d01.02
Present Min/Sec
[Actual value]
d01.04
Last time stop year
[Actual value]
d01.05
Last time stop MM/DD
[Actual value]
d01.06
Last time stop Min/Sec
[Actual value]
d01.07
Last time stop interval
[Actual value]
d01.08
System calibration time year
[Actual value]
d01.09
System calibration time MM/DD
[Actual value]
d01.08, d01.09 is used to correct the clock chip parameters when powering up.
•
Once change P00.00 and P00.01 manually, d00.07 and d00.08 will update accordingly.
•
When clock parameter is faulty and timing frequrncy switching function is enabled, inverter reports
E0034 (clock fault), inverter will exit timing functions (timing start / stop and frequency switching) and
start normally.
6