hpmont HD3Z Series, User Manual, Page: 40 / 117

Shenzhen Hpmont Technology Co., Ltd. Chapter 6 Function Introduction
HD3Z Series User Manual V1.2 -25-
Chapter 6 Function Introduction
6.1 Display Parameter
Group d is status display parameter.
6.1.1 d00: Status Display Parameter
Ref. Code Function Description Setting Range [Default]
d00.00 HD3Z series [Actual value]
d00.01 Software version of HD3Z [Actual value]
d00.03 Non-standard software version of HD3Z [Actual value]
d00.05 Software version of keypad [Actual value]
d00.06 Customized serial number [Actual value]
d00.08 Rated current of HD3Z (A) [Actual value]
d00.10 Inverter status [Actual value]
Displays the inverter status, as following:
Thousand Bit15: Frequency
switch mode
0: Not timing
1: Timing Bit14: Timing start /
stop mode
0: Not timing
1: Timing Bit13: Auto current
restriction
0: Do not restrict
1: Restrict Bit12: Stall
overvoltage
0: Invalid
1: Valid
Hundred Bit11: Dehumidifing
status of motor
0: Not started
1: Under way Bit10: Speed limitation
0: Below limitation
1: Above limitation Bit9: Unused Bit8: Unused
Ten Bit7: DC brake
0: Invalid
1: Valid Bit6: Unused Bit5&Bit4: Acc. / Dec. / Constant
00: Constant
11: Constant
01: Acc.
10: Dec.
Unit Bit3: Zero speed
0: Invalid
1: Valid Bit2: Forward / Reverse
0: Forward
1: Reverse Bit1: Run / Stop
0: Stop
1: Run Bit0: Inverter fault
0: Normal
1: Faulty
123
d00.11 Main setting frequency channel [Actual value]
0: Keypad.
1: Terminal.
2: Communication. 3: Analogue.
4: Terminal pulse.
6: AI1.
7: AI2.
11: PID.
12: Multi-speed.
14: Timing frequency.
d00.12 Main setting frequency (Hz) [Actual value]
d00.13 Aux setting frequency (Hz) [Actual value]
d00.14 Setting frequency (Hz) [Actual value]
d00.15 Setting frequency (after Acc. / Dec.) (Hz) [Actual value]
d00.16 Output frequency (Hz) [Actual value]
d00.17 Setting rpm (rpm) [Actual value]
d00.18 Running rpm (rpm) [Actual value]
d00.20 Output voltage (V) [Actual value]
d00.21 Output current (A) [Actual value]
d00.23 Output torque (%) [Actual value]
6