HP rp4410, Service Manual

Page: 59 / 246

Accessing a Pedestal-Mounted Server
The HP 9000 rp4410 and rp4440 servers are also designed to be mounted in a pedestal (non-rack).
You do not need to remove the pedestal from the server to gain access to internal components.
The front bezel, front cover, and top cover can be removed with the pedestal attached to the
server.
WARNING! Ensure that the server is properly grounded when performing remove and replace
procedures. Use an antistatic wrist strap and grounding mat similar to those found in the HP
Electrically Conductive Field Service Kit.
Figure 3-5 shows a pedestal-mounted server.
Figure 3-5 Pedestal-Mounted Server
Front Panel Controls and Indicators
The front panel of the server provides controls and indicators used for common operations.
Figure 3-6 , Figure 3-7 , and Figure 3-8 show the front view of the server and the control panel.
Installing Additional Components 59