HP rp4410, Service Manual

Page: 105 / 246

Table 3-13 Setup Checklist
X Action Step
Standard Setup
1. Determine a LAN configuration method and assign an IP
address if necessary.
2. Determine an access method to select and connect the cables.
Preparation 1
Choose one of the following methods to configure the LAN for
iLO MP access:
• DHCP with DNS
• ARP Ping
• RS-232 serial port Configure the iLO MP LAN 2
Log in to the iLO MP from a supported web browser or command
line using the default user name and password. Log on to the iLO MP 3
Change the default user name and password on the administrator
account to your predefined selections. Change default user name and
password 4
Set up the user accounts if you are using the local accounts
feature. Set up user accounts 5
Set up the security access settings. Set up security access 6
Advanced Setup
Activate advanced features by entering a license key. Activate Advanced Pack Features 1
Setup Flowchart
To assist in the Integrity iLO MP setup process, use this flowchart as a guide.
Console Setup 105