HP rp4410, Service Manual

Page: 237 / 246

Alternate boot path: intscsib.2
0/1/1/0.2
0/01/01/01.2 (hex)
Console path: 0/7/1/1.0
0/07/01/01.1 (hex)
Keyboard path: 0/0/4/0.0
0/0/04/0.0 (hex)
Main Menu: Enter command or manu >
Search Command
The
SEA
(search) command automatically checks all possible boot and install devices connected
to the system and displays these bootable paths. In several firmware versions, it links these paths
to a shortcut (such as P0). It can also search the LAN, if the system can boot it. Some firmware
revisions enable you to restrain the search path, for example
SEA
LAN or
SEA
disk. The
SEA
command is available in the
Main
and
COnfiguration
menus.
Main Menu: Enter command or menu > sea
Searching for potential boot device(s)
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
IODC
Path# Device Path (dec) Device Path (mnem) Device Type Rev
----- ----------------- ------------------ ----------- ----
P0 0/0/2/0.0 ide.0 Random access media 1
P1 0/1/1/0.1 intscsia.1 Random access media 1
P2 0/1/1/0.0 intscsia.0 Random access media 1
P3 0/1/1/1.2 intscsib.2 Random access media 1
Configuration Menu
The
COnfiguration
Menu commands enable you to view and modify the configuration and
state of the system.
Main Menu: Enter command or menu > co
---- Configuration Menu ------------------------------------------------------
Command Description
------- -----------
AUto [BOot|SEArch|STart] [ON|OFF] Display or set specified flag
BootID [<proc>] [<bootid>] Display or set Boot Identifier
BootINfo Display boot-related information
BootTimer [0 - 200] Seconds allowed for boot attempt
CPUconfig [<proc>] [ON|OFF] Config/Deconfig processor
DEfault Set the system to predefined values
FastBoot [ON|OFF] Display or set boot tests execution
ResTart [ON|OFF] Display or set boot tests execution
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
TIme [c:y:m:d:h:m:[s]] Read or set the real time clock in GMT
BOot [PRI|ALT|<path>] Boot from specified path
Boot Console Handler 237