HP rp4410, Service Manual

Page: 239 / 246

SCSI [option] [<path>] [<val>] Display or set SCSI controller values
MemRead <address> [<len>] Read memory and I/O locations
PDT [CLEAR] Display or clear the PDT
PIM [<proc>] [HPMC|LPMC|TOC] Display PIM information
ProductNum <O|C> [<number>] Display or set Product Number
ScRoll [ON|OFF] Display or change scrolling ability
SELftests [ON|OFF] Enable/disable self test execution
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<command>] Display help for specified command
RESET Restart the system
MAin Return to Main Menu
----
Service Menu: Enter command >
Display Command
The
DI
(display) command redisplays the current menu.
SCSI Command
The
SCSI
command displays and sets the SCSI controller parameters, such as initiator ID and
speed. The OS device drivers use these parameters to program the controller.
NOTE: These values are only suggested by the device driver; the actual values programmed
into the controller can be different.
ProductNum Command
The
ProductNum
command configures the original or current product number. The software
ID (SWID) does not get updated automatically when the original product number changes, but
you can manually update the SWID by resetting the system with the
reset
command.
iLO MP
The Integrated Lights-Out Management Processor (iLO MP) for HP PA-RISC and Integrity is an
autonomous management subsystem embedded directly on the server. It is the foundation of
server High Availability (HA), embedded server, and fault management. It also provides system
administrators secure remote management capabilities regardless of server status or location.
The iLO MP is available whenever the system is connected to a power source, even if the server
main power button is in the off position.
For complete information on the iLO MP, see the HP Integrity and HP 9000 iLO MP Operations
Guide.
iLO MP 239