HP rp4410, Service Manual

Page: 30 / 246

Table 1-4 Power Supply Status LED (continued)
Status Fail LED (Amber) Predict Fail LED
(Amber) Power LED
(Green)
PSU dc outputs are on and OK. Off Off On
Power supply failure. On Off Off
Predictive failure. The PSU is about to fail because of a poorly
performing fan. Off Blinking On
Current limit on 48 VDC output. Blinking Off On
iLO MP LAN LEDs
NOTE:
There are two different iLO MP cards that were installed in this server. They have
different LEDs on them. Both of them are shown below.
One of the iLO MP LAN cards has the amber LED on the left and the green LED on the right. It
is shown in
Figure 1-9 . The internal iLO MP LAN uses an RJ-45 type connector. This connector
has two LEDs (LAN link and LAN activity) that signal status and activity.
Figure 1-9 iLO MP LAN LEDs – Example 1
Table 1-5 provides iLO MP LED status descriptions.
Table 1-5 iLO MP LED Status Descriptions – Example 1
Status Condition LED
Linked at 100 MBs. No activity. On 100 M amber
Linked at 100 MBs. Activity present. Blinking 100 M amber
Linked at 10 MBs. No activity. On 10 M green
Linked at 10 MBs. Activity present. Blinking 10 M green
The other iLO MP LAN card has the green LED on the left and the amber LED on the right. Is is
shown in
Figure 1-10 .
30 Overview