HP L1000 - 9000 - 0 MB RAM, User Manual

Page: 179 / 231

Chapter 7
Removing and Replacing Components
Individual Component Remove/Replace Instructions
165
Memory DIMM Replacement
Memory DIMMs reside in slots located on the System Board (up to eight). They are loaded in DIMM pairs of
equal size.
Replacing rp5400 and/or rp5450 Memory DIMMs
To replace a memory DIMM, perform the following steps:
1. Seat the memory DIMM into its socket.
2. Press the extractor levers on each end of the memory DIMM slot inward until the levers snap into place.
The following graphics show a memory DIMM and a display of DIMM removal/replacement.
Replacing rp5470 Memory DIMMs
To replace an rp5470 memory DIMM, perform the following steps:
1. Seat the memory DIMM into its socket on the Memory Carrier.
2. Press the extractor levers on each end of the memory DIMM slot inward until the levers snap into place.
3. Attach the Memory Clip to the Memory Carrier with the DIMM slot markings on the top of the Memory
Clip aligned with the DIMM slot markings on the Memory Carrier. Secure the Memory Clip using the
captive screws.
4. Seat the Memory Carrier into the slot on the System Board.
5. Push down on the extractor levers and snap them into place.