HP L1000 - 9000 - 0 MB RAM, User Manual

Page: 178 / 231

Chapter 7
Removing and Replacing Components
Individual Component Remove/Replace Instructions
164
Memory DIMM Removal
Memory DIMMs reside in slots (up to eight) located on the System Board. They are loaded in DIMM pairs of
equal size.
Removing rp5400 Memory DIMMs
To remove an rp5400 memory DIMM, perform the following steps:
1. Press down on the extractor levers on each end of the selected memory DIMM to unseat the DIMM from
its socket.
2. When the memory DIMM unseats from the socket, pull it up and away from the System Board.
The following graphics show a memory DIMM, followed by a display of a DIMM being removed/replaced.
Removing rp5470 Memory DIMMs
To remove an rp5470 memory DIMM, perform the following steps:
1. Pull up on the extractor levers on each end of the Memory Carrier to unseat the Memory Carrier from its
socket.
2. When the Memory Carrier unseats from the socket, pull it up and away from the System Board.
3. Loosen the captive screws that secure the DIMM Clip and remove DIMM Clip from the Memory Carrier.
4. Press down on the extractor levers on each end of the selected memory DIMM to unseat the DIMM from
its socket.
5. When the memory DIMM unseats from the socket, pull it up and away from the Memory Carrier.