HP L1000 - 9000 - 0 MB RAM, User Manual

Page: 106 / 231

Chapter 6
Troubleshooting
Chassis Code to FRU Decode
92
3 - PDH Not Applicable
(N/A) N/A N/A System
Board Replace the System
Board.
4 - Power 1 - AC Mains N/A 9 - Power
Off AC Power Check that AC is
being supplied to all
power supplies.
4 - Power 3 - Low Voltage
DC Power CPU
Support
Module # N/A CPU
Support
Module Replace the
Processor Support
Module (on the
System Board)
referenced in the
Source ID.
4 - Power 4 - High Voltage
DC Power Power
Supply # N/A Power
Supply Replace the Power
Supply (in the front
of the system behind
the bezel) referenced
in the Source ID.
6 - Platform 3 - Cabinet Fan Fan # N/A Fan Replace the Fan
referenced in the
Source ID.
6 - Platform 6 - Service
Processor N/A N/A Core I/O The Service
Processor is on the
GSP I/O board.
Replace the GSP
6 - Platform 7 - Power
Monitor N/A N/A Power
Monitor Replace Platform
Monitor card.
7 - Memory 1 - Controller N/A N/A System
Board Replace the System
Board.
7 - Memory 4 - SIMM or
DIMM N/A N/A Memory
DIMM Isolate to failing
DIMM using BCH
(IN, ME) and ODE
memory diagnostic.
8 - I/O 6 - Disk N/A Various
Values Disk
Subsyste
m Use BCH commands
and ODE
diagnostics to check
disk subsystem.
Table 6-2 Chassis Log Error to FRU Decoder (Continued)
Chassis Log Field Values and Descriptions from
Log Entry
Source Source Detail
Source
ID
Problem
Detail
FRU Action to Take