manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual

The HP HP-UX SNAplus2 Administration Manual is a comprehensive guide that provides step-by-step instructions for effectively managing and leveraging the features of this powerful product. Available for free download from manualshive.com, this manual equips users with invaluable knowledge to optimize their experience with the HP-UX SNAplus2 software.

Share
Download
background image

Chapter 7

179

Configuring APPC Communication

Defining Local LUs

Command-line administration program

Issue the following command:

define_local_lu

You can use the advanced dialog to specify sync point support, attach
routing characteristics, restrictions on SSCP access, and security.

Local LU Configuration Parameters

The following parameters are required for local LU configuration:

LU name

The LU name of the local LU.
If you do not know what name to use, consult your SNA
network planner.
This LU name is the second part of the fully qualified
LU name of the local LU. The first part of the fully
qualified LU name (the network name) is always the
same as the first part of the CP name of the local node.

LU alias

The LU alias of the LU. If you do not enter an alias, the
LU name is used as the alias.

Host LS/DLUR PU

The name of the host link station or DLUR PU to which
the LU belongs. (This field applies only if the LU is a
dependent LU.)

LU number

The LU number of the dependent LU. (This field
applies only if the LU is a dependent LU.)

Member of default pool

Whether to make the LU a member of the default
dependent APPC LU pool. An application that does not
specify a particular local LU to use is assigned an
available LU from the default pool.
This field applies only if the LU is a dependent LU.

Additional Configuration

After performing the local LU configuration, continue with the following
configuration tasks:

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for HP-UX SNAplus2

D-Link GO-RT-N300 Quick Installation Manual preview
GO-RT-N300
Brand: D-Link Pages: 32
D-Link DXN-W224 Quick Start Manual preview
DXN-W224
Brand: D-Link Pages: 6
D-Link DSR-250N User Manual preview
DSR-250N
Brand: D-Link Pages: 221
D-Link Express Ethernetwork DI-707P Quick Installation Manual preview
Express Ethernetwork DI-707P
Brand: D-Link Pages: 14
Cambium Networks PTP 820 Series Manual preview
PTP 820 Series
Brand: Cambium Networks Pages: 29
ICP DAS USA ET-7000 series Quick Start Manual preview
ET-7000 series
Brand: ICP DAS USA Pages: 14
ICP DAS USA I-2533 User Manual preview
I-2533
Brand: ICP DAS USA Pages: 25
ICP DAS USA ET-2200 Series Manual preview
ET-2200 Series
Brand: ICP DAS USA Pages: 15
ICP ZT-2550 Quick Start Manual preview
ZT-2550
Brand: ICP Pages: 14
Dazzle Hollywood DV-Bridge User Manual preview
Hollywood DV-Bridge
Brand: Dazzle Pages: 63
SMC Networks Barricade SMC7901WBRA2 Installation Manual preview
Barricade SMC7901WBRA2
Brand: SMC Networks Pages: 2
IDT 89HPES16NT2 User Manual preview
89HPES16NT2
Brand: IDT Pages: 292
Asante IntraCore 6524 User Manual preview
IntraCore 6524
Brand: Asante Pages: 150
Rajant Corporation BreadCrumb CX1 User Manual preview
BreadCrumb CX1
Brand: Rajant Corporation Pages: 40
Paradyne JetFusion 2100 Series User Manual preview
JetFusion 2100 Series
Brand: Paradyne Pages: 296
Modecom MC-421 Quick Installation Manual preview
MC-421
Brand: Modecom Pages: 16
Ricoh Network Scanning Unit A Operating Instructions Manual preview
Network Scanning Unit A
Brand: Ricoh Pages: 206
Multi-Link Power Stone Programming Manual preview
Power Stone
Brand: Multi-Link Pages: 31

Brands by name

Popular brands

Load more brands