HP HP-UX SNAplus2, Administration Manual

Page: 16 / 398

16
Explains how to configure connectivity for the
SNAplus2 node.
Chapter 6, “Configuring Dependent LUs.”
Explains how to configure dependent LUs (logical
units) for LU types 0–3 and LU pools.
Chapter 7, “Configuring APPC Communication.”
Explains how to configure APPC (advanced
program-to-program communications).
Chapter 8, “Configuring User Applications.”
Explains how to configure user applications.
Chapter 9, “Configuring Passthrough Services.”
Explains how to configure passthrough services, which
support communication between host systems and
local systems that are not directly connected.
Chapter 10, “Managing SNAplus2 from NetView.”
Explains how to use the SNAplus2 remote command
facility (RCF) to manage SNAplus2 and run commands
on SNAplus2 nodes from a host running NetView.
Chapter 11, “Managing SNAplus2 Clients.”
Explains how to configure and manage SNAplus2
clients.
Appendix A, “Configuration Planning Worksheets.”
Provides configuration worksheets for SNAplus2.
Appendix B, “APPN Network Management Using the Simple Network
Management Protocol.”
Provides information about the support provided by
SNAplus2 for the Simple Network Management
Protocol (SNMP). This appendix also provides a list of
the APPN Management Information Base (MIB)
databases that SNAplus2 supports.
Appendix C, “Configuring an Invokable TP Using snaptpinstall.”
Provides information about the snappinstall utility and
how it can be used to define an invokable TP.
Appendix D, “Using SNAplus2 in a High Availability Environment.”
Describes the high availability features of SNAplus2
and how it works with the HP MC/ServiceGuard
product.