manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual

The HP HP-UX SNAplus2 Administration Manual is a comprehensive guide that provides step-by-step instructions for effectively managing and leveraging the features of this powerful product. Available for free download from manualshive.com, this manual equips users with invaluable knowledge to optimize their experience with the HP-UX SNAplus2 software.

Share
Download
background image

112

Chapter 3

Administering SNAplus2

Enabling and Disabling SNAplus2 on the Local System

Enabling SNAplus2 Servers

This section describes how to enable SNAplus2 on a computer that was
installed as a server (that is, with the SNA node components installed).
If you are enabling SNAplus2 on a client, see “Enabling SNAplus2 on
HP-UX Clients”.

You must enable SNAplus2 on the local system before you can configure
or manage the local node (either locally or from a remote SNAplus2
node).

To enable the SNAplus2 software, enter the following command at the
HP-UX command prompt:

snap start [ -s ] [ -m kernel_memory_limit] [ -t ]

You can also enable SNAplus2 automatically at system startup by
inserting the

snap start

 command into the startup file on your system.

(When you install SNAplus2, the installation utility automatically
updates the startup file with this information.)

The parameters and options for the

snap start

 command are as

follows:

-s

Specifies that SNAplus2 should not write messages to
the system console. If you do not use this option,
SNAplus2 writes messages to the console when it ends,
and also writes the text of certain error log messages to
the console as well as to the log file.

-m

kernel_memory_limit

Specifies the maximum amount of kernel memory, in
kilobytes, that SNAplus2 should use at any time.
(Kernel memory is used for internal data structures.) If
a component of SNAplus2 attempts to allocate kernel
memory that would cause the total amount of memory
currently allocated to SNAplus2 components to exceed
this limit, the allocation attempt fails.
If you do not use this option, kernel memory usage is
not limited.

-t

Activates tracing on all interfaces between kernel
components, and also client/server and back-level
client/server tracing. (This option does not turn on DLC

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for HP-UX SNAplus2

Watchguard Firebox SOHO 6 Wireless Instructions Manual preview
Firebox SOHO 6 Wireless
Brand: Watchguard Pages: 8
Hawking CF100W Specifications preview
CF100W
Brand: Hawking Pages: 2
Enertronica Santerno SINUS H PROFInet User Manual preview
SINUS H PROFInet
Brand: Enertronica Santerno Pages: 34
Alcatel Speed Touch 591s Technical User'S Manual preview
Speed Touch 591s
Brand: Alcatel Pages: 184
SurfControl 509-8629-00 Setup Manual preview
509-8629-00
Brand: SurfControl Pages: 2
Lutron Electronics Smart Bridge Quick Start Manual preview
Smart Bridge
Brand: Lutron Electronics Pages: 4
Allied Telesis AT-TN7100 User Manual preview
AT-TN7100
Brand: Allied Telesis Pages: 2
Kentrox RMM-1400 Configuration Manual preview
RMM-1400
Brand: Kentrox Pages: 246
Toto Link ND300V2 Manual preview
ND300V2
Brand: Toto Link Pages: 57
Extreme Networks ACC-BKT-AX-BEAM Accessories Manual preview
ACC-BKT-AX-BEAM
Brand: Extreme Networks Pages: 35
Thecus N5200BR User Manual preview
N5200BR
Brand: Thecus Pages: 90
S-Access SA-REP-ETHERLINK_II-1DA-PL Manual preview
SA-REP-ETHERLINK_II-1DA-PL
Brand: S-Access Pages: 106
Tripp Lite B078-001-USB Specification preview
B078-001-USB
Brand: Tripp Lite Pages: 2
EtherWAN EX17016 Installation Manual preview
EX17016
Brand: EtherWAN Pages: 2
D-Link DSL-125 Quick Installation Manual preview
DSL-125
Brand: D-Link Pages: 12
Lanner ICS-I372 User Manual preview
ICS-I372
Brand: Lanner Pages: 80
Lanner NCA-5540 User Manual preview
NCA-5540
Brand: Lanner Pages: 116
Advantage Boost Box Setup Manual preview
Boost Box
Brand: Advantage Pages: 4

Brands by name

Popular brands

Load more brands