HP HP-UX SNAplus2, Administration Manual

Page: 278 / 398

278 Chapter 11
Managing SNAplus2 Clients
Managing Win16 Clients
password, or if the user name and password cannot be matched with a
user name and password on the server, the server rejects the client's
access attempt.
To stop using Win16 client security, so that any Win16 client user can
access SNAplus2 servers without having to specify a password, use the
following command:
snapwinsec off
This command removes Win16 client security on all servers in the
SNAplus2 domain. You do not need to repeat the command on other
servers.
Win16 Client Initialization File (sna.ini)
For Windows 3.1 or Windows for Workgroups 3.11, configuration
information is kept in the
sna.ini
file.
The Win16 client initialization file,
sna.ini
, contains SNA network
information (similar to the information held in the client network data
file on HP-UX clients). This file also contains some additional
configuration information that is specific to Win16 clients. This file is
stored in the directory where the Windows software was installed
(typically
c:\windows
); it is set up during the client installation process,
and is an ASCII text file that can be modified later as required using a
standard text editor.
The contents of the file are as follows:
[Configuration]
domain =
domain_name
snauser =
user_name
snagroup =
group_name
invoked_tps = YES | NO
lan_access_timeout =
nn
broadcast_attempt_count =
nn
server_lost_timeout =
nn
[Servers]
Server1 = * |
servername1
Server2 =
servername2
.
.
.
Server10 =
servername10
[Logging]
exception_logging_enabled = YES | NO
audit_logging_enabled = YES | NO
log_directory =
directory
error_file =
error_filename