manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual

The HP HP-UX SNAplus2 Administration Manual is a comprehensive guide that provides step-by-step instructions for effectively managing and leveraging the features of this powerful product. Available for free download from manualshive.com, this manual equips users with invaluable knowledge to optimize their experience with the HP-UX SNAplus2 software.

Share
Download
background image

Chapter 2

67

Introduction to SNAplus2

What Is SNAplus2?

What Is SNAplus2?

SNAplus2 is a software product that enables HP-UX computers to
participate in an SNA network that includes mainframes, PCs, and other
HP-UX computers. With SNAplus2, you can access data and programs
that reside on other computer systems, thereby increasing your
computing power.

SNAplus2 includes the following facilities:

SNA communication facilities

SNAplus2 nodes can operate within an SNA subarea
network, within an APPN network, or within both at
the same time. For more information about SNA
support supplied by SNAplus2, see “SNA Support”.

Passthrough services

SNAplus2 includes services that support
communication between a host and computers on a
LAN, making it possible to reduce the number of
communication links to the host, simplify configuration
of SNA nodes, and provide host access for computers
that have no direct link to a host. For more information
about passthrough services, see “Passthrough
Services”.

User applications

SNAplus2 supports the following user applications:

• 3270 emulation
• 5250 emulation
• Remote job entry (RJE)
For more information about user applications, see
“User Applications”.

Application programming interfaces

SNAplus2 includes application programming
interfaces (APIs) that you can use to write user
application programs or SNAplus2 administration
programs. For more information about SNAplus2 APIs,
see “Application Programming Interfaces”.

LAN facilities

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for HP-UX SNAplus2

ABB i-bus KNX IPR/S 3.5.1 Product Manual preview
i-bus KNX IPR/S 3.5.1
Brand: ABB Pages: 44
D-Link DWR-112 Technical Support Setup Procedure preview
DWR-112
Brand: D-Link Pages: 11
D-Link DSR-250 Cli Reference Manual preview
DSR-250
Brand: D-Link Pages: 83
D-Link DSR-150 Reference Manual preview
DSR-150
Brand: D-Link Pages: 129
D-Link DSL-G804V Manual preview
DSL-G804V
Brand: D-Link Pages: 10
D-Link DSL-G804V Quick Information Manual preview
DSL-G804V
Brand: D-Link Pages: 21
D-Link DSL-2750E Quick Start Manual preview
DSL-2750E
Brand: D-Link Pages: 6
D-Link DSL-2750E Technical Support Setup Procedure preview
DSL-2750E
Brand: D-Link Pages: 17
D-Link DSL-2740U Setup Manual preview
DSL-2740U
Brand: D-Link Pages: 4
D-Link DSL-2730B How To Set Up preview
DSL-2730B
Brand: D-Link Pages: 6
D-Link DSL-520T Quick Installation Manual preview
DSL-520T
Brand: D-Link Pages: 86
D-Link DSL-502T Installing Usb Drivers preview
DSL-502T
Brand: D-Link Pages: 3
D-Link DSL-3900 Quick Start Manual preview
DSL-3900
Brand: D-Link Pages: 4
D-Link DWR-921 How To Set Up preview
DWR-921
Brand: D-Link Pages: 4
D-Link DSL-3580L Series Quick Installation Manual preview
DSL-3580L Series
Brand: D-Link Pages: 20
D-Link DSL-3785 Quick Installation Manual preview
DSL-3785
Brand: D-Link Pages: 64
D-Link DSL-224 User Manual preview
DSL-224
Brand: D-Link Pages: 73
H3C MSR 20-20 Supplementary Manual preview
MSR 20-20
Brand: H3C Pages: 6

Brands by name

Popular brands

Load more brands