manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual

The HP HP-UX SNAplus2 Administration Manual is a comprehensive guide that provides step-by-step instructions for effectively managing and leveraging the features of this powerful product. Available for free download from manualshive.com, this manual equips users with invaluable knowledge to optimize their experience with the HP-UX SNAplus2 software.

Share
Download
background image

192

Chapter 7

Configuring APPC Communication

Defining TPs

The TP is started in the home directory associated with
this user ID. This home directory is also the default
path for trace files and any other files accessed by the
TP (unless the application overrides it by specifying a
full path). If the application specifies a file name
without a path, SNAplus2 searches for the file in this
home directory; if the application specifies a file name
with a relative path, SNAplus2 searches for the file in
the specified directory relative to this home directory.
The executable file for the TP, specified by the Full
path to TP executable parameter, must have execute
permission for the specified user. In addition, if User
ID is set to root, the file must be owned by root and
must have

setuid

 and

setgid

 permission in order to

be started automatically by SNAplus2.

Group ID

The group ID that SNAplus2 uses to start the TP. This
must be a valid HP-UX group ID on the SNAplus2
computer.
This line is optional. If it is not included, the default is

sna

.

TP Definition Parameters

You can configure an APPC TP to specify conversation type, sync level,
and handling of PIP data. The following parameters are also required to
define a TP for APPC communication:

TP name

A TP name in one of the following forms:

Application TP

If the remote TP is a user application, supply the name
as normal characters (up to 64 characters in length).

Service TP

If the remote TP is an SNA service transaction
program, supply the name in hexadecimal (up to eight
hexadecimal digits, representing 4 bytes).

Conversation level security required

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for HP-UX SNAplus2

National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Brand: National Instruments Pages: 36
CyberTAN WR214C User Manual preview
WR214C
Brand: CyberTAN Pages: 67
Federal Signal Corporation AR2000-M Installation And Maintenance Manual preview
AR2000-M
Brand: Federal Signal Corporation Pages: 49
Softing TH LINK Installation Manual preview
TH LINK
Brand: Softing Pages: 16
Starbridge Networks ADSL Ethernet & USB Combo Router Lynx L-510 User Manual preview
ADSL Ethernet & USB Combo Router Lynx L-510
Brand: Starbridge Networks Pages: 59
Sun Microsystems McDATA Eclipse 1620 Release Notes preview
McDATA Eclipse 1620
Brand: Sun Microsystems Pages: 9
Zhone 6388-A2 User Manual preview
6388-A2
Brand: Zhone Pages: 53
H3C AR 46-80 Installation Manual preview
AR 46-80
Brand: H3C Pages: 103
ADTRAN 1202052L1 User Manual preview
1202052L1
Brand: ADTRAN Pages: 136
IEI Technology PUZZLE-IN005 User Manual preview
PUZZLE-IN005
Brand: IEI Technology Pages: 106
Paradyne FrameSaver DSL 9783 CSU/DSU User Manual preview
FrameSaver DSL 9783 CSU/DSU
Brand: Paradyne Pages: 233
Datacom DM4610 Installation Manual preview
DM4610
Brand: Datacom Pages: 45
MikroTik 711UA-2HnD Quick Setup Manual And Warranty Information preview
711UA-2HnD
Brand: MikroTik Pages: 2
Edimax 9570840711 User Manual preview
9570840711
Brand: Edimax Pages: 100
Telegärtner MPD12-H K Cat.6A Assembly Instructions preview
MPD12-H K Cat.6A
Brand: Telegärtner Pages: 2
Redline Communications RDL-2000 User Manual preview
RDL-2000
Brand: Redline Communications Pages: 50
ferroamp EnergyHub XL Installation And User Manual preview
EnergyHub XL
Brand: ferroamp Pages: 19
Moxa Technologies EtherDevice EDS-518A Series Hardware Installation Manual preview
EtherDevice EDS-518A Series
Brand: Moxa Technologies Pages: 17

Brands by name

Popular brands

Load more brands