manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual

The HP HP-UX SNAplus2 Administration Manual is a comprehensive guide that provides step-by-step instructions for effectively managing and leveraging the features of this powerful product. Available for free download from manualshive.com, this manual equips users with invaluable knowledge to optimize their experience with the HP-UX SNAplus2 software.

Share
Download
background image

106

Chapter 2

Introduction to SNAplus2

SNAplus2 Administration

• Using command-line utilities, you can filter trace files to extract or

interpret specific information or to produce a summary of message
flows. The resulting output files can be viewed using a standard
ASCII text editor such as

vi

.

• SNAplus2 can generate alerts and send them to the NetView

program at a host computer. These alerts can be any of the following:

• Link alerts from connectivity components, to provide information

about connection problems

• 3270 user alerts from the emulation program

• Alerts supplied by an application program using the MS API

Refer to the HP-UX SNAplus2 Diagnostics Guide for information about
SNAplus2 log messages, using SNAplus2 trace facilities, and
interpreting trace files.

For information about using the MS API, refer to the HP-UX SNAplus2
MS Programmers Guide.

Simple Network Management Protocol Support

The Simple Network Management Protocol (SNMP) is an
industry-standard management protocol. SNAplus2 includes an SNMP
subagent to provide support for the APPN Management Information
Base (MIB) database maintained by AIX.

For a more detailed discussion of SNMP and for a list of the APPN MIB
objects that are supported by the SNAplus2 SNMP subagent, see
Appendix B, “APPN Network Management Using the Simple Network
Management Protocol.”

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for HP-UX SNAplus2

Panasonic WJ-NV200K Quick Reference Manual preview
WJ-NV200K
Brand: Panasonic Pages: 4
Eaton INDGW-X2 Manual preview
INDGW-X2
Brand: Eaton Pages: 10
National Instruments Module NI PXI-8250 User Manual preview
Module NI PXI-8250
Brand: National Instruments Pages: 39
IBM TotalStorage SAN16M-R SAN Installation And Service Manual preview
TotalStorage SAN16M-R SAN
Brand: IBM Pages: 116
Garland INT10G10SP2 User Manual preview
INT10G10SP2
Brand: Garland Pages: 6
Google AC-1304 User Manual preview
AC-1304
Brand: Google Pages: 14
Ubiquiti airMAX NanoBridge M NBM3 Quick Start Manual preview
airMAX NanoBridge M NBM3
Brand: Ubiquiti Pages: 24
Lanpro LP-SW811 User Manual preview
LP-SW811
Brand: Lanpro Pages: 6
netsys NV-600W User Manual preview
NV-600W
Brand: netsys Pages: 243
Draytek Vigor 3200 Series User Manual preview
Vigor 3200 Series
Brand: Draytek Pages: 356
Patton electronics 3224 Diamond Edge Specification Sheet preview
3224 Diamond Edge
Brand: Patton electronics Pages: 2
NETGEAR FS305 Installation Manual preview
FS305
Brand: NETGEAR Pages: 2
Vivotek ND9312 User Manual preview
ND9312
Brand: Vivotek Pages: 185
H3C MSR 2600 Installation, Quick Start preview
MSR 2600
Brand: H3C Pages: 4
Patton electronics 593/25, 593/45, 593/TB, RS-422, RS-485 User Manual preview
593/25, 593/45, 593/TB, RS-422, RS-485
Brand: Patton electronics Pages: 8
MTI BR5811 User Manual preview
BR5811
Brand: MTI Pages: 41
Digi Digi Connect WAN Application Manual preview
Digi Connect WAN
Brand: Digi Pages: 3
Digi CR4110 Installation Manual preview
CR4110
Brand: Digi Pages: 13

Brands by name

Popular brands

Load more brands