manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual

The HP HP-UX SNAplus2 Administration Manual is a comprehensive guide that provides step-by-step instructions for effectively managing and leveraging the features of this powerful product. Available for free download from manualshive.com, this manual equips users with invaluable knowledge to optimize their experience with the HP-UX SNAplus2 software.

Share
Download
background image

Chapter 1

57

SNA Terms and Concepts

Basic APPN Concepts

• If the session partner is not on an adjacent node, the network node

server for the LU requesting the session uses the network topology
database to identify network nodes and intermediate transmission
groups in the route to the session partner.

• If the session partner is on an end node, the end node (or its

network node server) provides information about the link between
the network node server and that end node (or the link between
the end node and a connection network).

3. Excludes all network nodes and transmission groups that do not meet

the specified characteristics for the session route.

4. Computes the optimal route for the session.

Depending on the specified class of service, the route calculation
algorithm computes a weight value for each node and logical link and
then totals the weights for each route. To select the optimal path, the
network node computes the current least-weight route from the node
containing the originating LU to the node containing the destination LU.

Intermediate Routing

Intermediate routing enables an APPN network node to receive and
route data destined for another node. The origin and destination of the
data can be an end node, another network node, or a LEN.

Intermediate routing supports sessions between LUs that are not on
adjacent nodes. After a route has been selected for a session, APPN
network nodes in the route use intermediate routing to forward session
data to the next node in the route.

Resource characteristics maintained by the topology database can
include congestion status. If a network node becomes heavily congested,
the network node can relay this information to other network nodes in
the network, making the congested network node less likely to be
included in session routes calculated for new sessions.

APPN provides two types of intermediate routing:

• In intermediate session routing (ISR), available in all network nodes,

the network node keeps track of each intermediate session. Each
intermediate node adjusts the pacing of session data to control the
rate at which data flows between adjacent nodes. Each intermediate
node can also perform segmentation and reassembly of segmented

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for HP-UX SNAplus2

Paradyne 4300 Installation Instructions Manual preview
4300
Brand: Paradyne Pages: 22
iDirect iQ Desktop+ Installation, Support, And Maintenance Manual preview
iQ Desktop+
Brand: iDirect Pages: 52
Enterasys X-Pedition 2000 Getting Started Manual preview
X-Pedition 2000
Brand: Enterasys Pages: 86
Dazzle Hollywood DV-Bridge User Manual preview
Hollywood DV-Bridge
Brand: Dazzle Pages: 63
Ubiquiti AmpliFi AFi-G Quick Start Manual preview
AmpliFi AFi-G
Brand: Ubiquiti Pages: 20
AMG Systems AMG9240-C User Manual preview
AMG9240-C
Brand: AMG Systems Pages: 2
WABCO CAN Router Manual preview
CAN Router
Brand: WABCO Pages: 29
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Brand: ivideon Pages: 11
KYLAND Technology KIEN3016A Hardware Installation Manual preview
KIEN3016A
Brand: KYLAND Technology Pages: 19
IBM Redbooks Emulex VFA5 Product Manual preview
Redbooks Emulex VFA5
Brand: IBM Pages: 15
JETWAY FDF13 Series Quick Installation Manual preview
FDF13 Series
Brand: JETWAY Pages: 15
S-Access SA-REP-ETHERLINK_II-1DA-PL Manual preview
SA-REP-ETHERLINK_II-1DA-PL
Brand: S-Access Pages: 106
Open House H634 Manual preview
H634
Brand: Open House Pages: 2
Adeunis RF ARF8264AAA Quick Start Manual preview
ARF8264AAA
Brand: Adeunis RF Pages: 9
MikroTik CCR1009-7G-1C-1S+ Quick Manual preview
CCR1009-7G-1C-1S+
Brand: MikroTik Pages: 9
Zte MF28B User Manual preview
MF28B
Brand: Zte Pages: 32
TRENDnet TEW-630APB - Wireless Access Point User Manual preview
TEW-630APB - Wireless Access Point
Brand: TRENDnet Pages: 56
Advantech SmartStart SL302 User Manual preview
SmartStart SL302
Brand: Advantech Pages: 45

Brands by name

Popular brands

Load more brands