manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual

The HP HP-UX SNAplus2 Administration Manual is a comprehensive guide that provides step-by-step instructions for effectively managing and leveraging the features of this powerful product. Available for free download from manualshive.com, this manual equips users with invaluable knowledge to optimize their experience with the HP-UX SNAplus2 software.

Share
Download
background image

Chapter 4

135

Basic Configuration Tasks

Configuring Client/Server Functions

Configuring Client/Server Functions

This section is relevant only if you installed SNAplus2 to run in a
client/server environment (with multiple SNAplus2 nodes in the same
network).

Many resources, such as ports and LUs, are configured on an individual
node. These are known as “node resources.”

Other resources, such as emulator user definitions, are common to all
nodes; only one definition for the resource is maintained for the entire
domain. Such resources are known as “domain resources.” Domain
resource definitions are stored only on the master server for the domain,
and are accessible from all the nodes in the domain.

NOTE

A standalone SNAplus2 system has only one server; that server always
acts as the master.

In a client/server environment, a server can be marked as a
configuration server; SNAplus2 maintains a list of these configuration
servers. The first server listed is the master server, and any other servers
listed are backup servers. The servers are listed in order, so that the
second server listed (the first backup server) takes over if the master
server is unavailable, the third server listed (the second backup server)
takes over if neither the master nor the first backup server is available,
and so on.

When any of the nodes in the domain are active, the first available
configuration server in the domain (the first server that can be contacted
and has SNAplus2 software running) becomes the master server. If the
current master becomes unavailable (because it cannot be contacted,
perhaps due to a network failure, or because the SNA software running
on it is stopped), the next available configuration server in the list
becomes the new master.

SNAplus2 can run without a master. This happens if none of the servers
in the configuration server list can be contacted. If this happens, you can
view and configure node resources only on the servers that can be
contacted.

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for HP-UX SNAplus2

Accelerated 6330-MX User Manual preview
6330-MX
Brand: Accelerated Pages: 10
Accelerated 6300-CX Customer Setup Instructions preview
6300-CX
Brand: Accelerated Pages: 4
JCG Q5 Quick Installation Manual preview
Q5
Brand: JCG Pages: 3
OCCITALINA OXTOPUS EIA-709 User Manual preview
OXTOPUS EIA-709
Brand: OCCITALINA Pages: 54
MikroTik RouterBOARD SXT 5HnD Quick Setup Manual And Warranty Information preview
RouterBOARD SXT 5HnD
Brand: MikroTik Pages: 2
ZyXEL Communications P-336M Specifications preview
P-336M
Brand: ZyXEL Communications Pages: 2
Vaisala TERMBOX-1200 User Manual preview
TERMBOX-1200
Brand: Vaisala Pages: 32
Enertronica Santerno SINUS H PROFInet User Manual preview
SINUS H PROFInet
Brand: Enertronica Santerno Pages: 34
NetComm 3G25W-R Manual preview
3G25W-R
Brand: NetComm Pages: 69
Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual preview
NetIron MLXe Series
Brand: Brocade Communications Systems Pages: 305
Eaton SONiX Pm10 Technical Manual preview
SONiX Pm10
Brand: Eaton Pages: 14
Leviton IPHS5-1LW Product Bulletin preview
IPHS5-1LW
Brand: Leviton Pages: 4
iDirect iNFINITI 3000 Installation And Commissioning Manual preview
iNFINITI 3000
Brand: iDirect Pages: 72
ADTRAN EXPRESS 6503 User Manual preview
EXPRESS 6503
Brand: ADTRAN Pages: 20
netsys NVF-2400S User Manual preview
NVF-2400S
Brand: netsys Pages: 164
Spirent A2-400 Installation Instructions Manual preview
A2-400
Brand: Spirent Pages: 22
Airlinkplus UG-ASW232-1103 User Manual preview
UG-ASW232-1103
Brand: Airlinkplus Pages: 24
RouterBOARD Groove A-52HPn Quick Setup Manual preview
Groove A-52HPn
Brand: RouterBOARD Pages: 4

Brands by name

Popular brands

Load more brands