manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual, Page: 246 / 398

Share
Download
HP HP-UX SNAplus2 Administration Manual Download Page 246

246

Chapter 10

Managing SNAplus2 from NetView

Using UCF

If you issue a command when a previous command is still in progress
(that is, before the

UNIX COMMAND COMPLETED

 message is received), the

following message is displayed:

= = = COMMAND QUEUED = = =

The second command is queued, and is executed when the previous
command has completed.

Canceling a Command

UCF provides a method of canceling a command that is still in progress.
This can be used to stop the current command from executing, or to
cancel an interactive command such as

vi

filename that cannot

complete without further input. It is equivalent to using an interrupt
sequence such as

Ctrl + C

 to stop a process running on a terminal, or using

the HP-UX

kill

 command to stop the process.

In addition to canceling the command that is currently executing,
SNAplus2 cancels any commands that are queued after it.

The command syntax is the same as for the HP-UX command, with the
string

ux-cancel

 instead of the command text. For example:

runcmd sp=myspname, appl=unix, ux-cancel

For each outstanding command (the one currently executing and any
queued commands), the following message is displayed:

= = = UNIX COMMAND CANCELLED = = =

This message indicates that the HP-UX shell in which the command was
running has been stopped. Further HP-UX commands can be issued as
necessary.

If a command starts a daemon process on the HP-UX computer, this
process may not be stopped by

ux-cancel

. You may need to use the

HP-UX

kill

 command (either on a terminal or by using UCF) to stop

such a process explicitly.

If no UCF command is running when

ux-cancel

 is used, UCF displays

the following message:

NO OUTSTANDING COMMANDS

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments