manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual

The HP HP-UX SNAplus2 Administration Manual is a comprehensive guide that provides step-by-step instructions for effectively managing and leveraging the features of this powerful product. Available for free download from manualshive.com, this manual equips users with invaluable knowledge to optimize their experience with the HP-UX SNAplus2 software.

Share
Download
background image

Chapter 11

267

Managing SNAplus2 Clients

Managing Win32 Clients

The Registry data type of this value is

REG_SZ

.

Specifies whether to use succinct logging or verbose
logging in the audit log file. The permitted values and
their meanings are the same as for the
succinct_errors parameter.

API_tracing

The

API_tracing

 subkey specifies API tracing options for applications

running on the client. For more information about tracing, refer to
HP-UX SNAplus2 Diagnostics Guide. The tracing options are specified
as follows:

file1

The Registry data type of this value is

REG_SZ

.

The full path name of the trace file, or of the first trace
file if tracing is to two files (see the description of the
file2 parameter).
This parameter is required if you want to enable API
tracing.

file2

The Registry data type of this value is

REG_SZ

.

The full path name of the second trace file. This
parameter is optional; to indicate that tracing is to one
file instead of two files, do not include this line.
If both file1 and file2 are specified, tracing is to two
files. When the first file reaches the size specified by
the flip_size parameter, the second file is cleared, and
tracing continues to the second file. When this file then
reaches the size specified by flip_size, the first file is
cleared, and tracing continues to the first file. This
ensures that tracing can continue for long periods
without using excessive disk space; the maximum
space required is approximately twice the value of the
flip_size parameter.

flip_size

The Registry data type of this value is

REG_DWORD

.

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for HP-UX SNAplus2

B+B SmartWorx CR10 v2 Start Manual preview
CR10 v2
Brand: B+B SmartWorx Pages: 4
Valcom VIP-822 Manual preview
VIP-822
Brand: Valcom Pages: 3
Valcom VIP-814 User Manual preview
VIP-814
Brand: Valcom Pages: 4
NETGEAR DG834GT - 108 Mbps Super G Wireless ADSL Router Specifications preview
DG834GT - 108 Mbps Super G Wireless ADSL Router
Brand: NETGEAR Pages: 2
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Brand: National Instruments Pages: 36
IntesisBox IBOX-BAC Series Installation Sheet preview
IBOX-BAC Series
Brand: IntesisBox Pages: 2
Linksys WRT54GR - Wireless-G Broadband Router Quick Installation Manual preview
WRT54GR - Wireless-G Broadband Router
Brand: Linksys Pages: 81
Zhone IMACS Network Device Product Manual preview
IMACS Network Device
Brand: Zhone Pages: 114
VoiceLine InnoMedia MTA 3328-2R Getting Started Manual preview
InnoMedia MTA 3328-2R
Brand: VoiceLine Pages: 18
National Instruments NI 447 Series User Manual preview
NI 447 Series
Brand: National Instruments Pages: 80
TP-Link TL-MR3620 Installation Manual preview
TL-MR3620
Brand: TP-Link Pages: 2
Planet VC-820M Quick Installation Manual preview
VC-820M
Brand: Planet Pages: 2
Planet GSW-2416SF User Manual preview
GSW-2416SF
Brand: Planet Pages: 54
ZyXEL Communications POE-12 Specifications preview
POE-12
Brand: ZyXEL Communications Pages: 2
ADTRAN 239 T1 HDSL4 Installation And Maintenance Manual preview
239 T1 HDSL4
Brand: ADTRAN Pages: 20
Net Optics Phantom HD Quick Install Manual preview
Phantom HD
Brand: Net Optics Pages: 2
Eneo PNR-5332/3TB Quick Installation Manual preview
PNR-5332/3TB
Brand: Eneo Pages: 49
Billionton GMIWLGRL2 User Manual preview
GMIWLGRL2
Brand: Billionton Pages: 26

Brands by name

Popular brands

Load more brands