HP HP-UX SNAplus2, Administration Manual, Page: 271 / 398

Chapter 11 271
Managing SNAplus2 Clients
Managing Win32 Clients
The maximum size of the trace file. If two file names
are specified, tracing switches between the two files
when the current file reaches this size. If only one file
name is specified, this parameter is ignored; the file
size is not limited.
This parameter is optional. If it is not specified, the
default is
1000000
(bytes).
truncation_length
The Registry data type of this value is
REG_DWORD
.
The maximum length, in bytes, of the information
written to the trace file for each message. If a message
is longer than this, SNAplus2 writes only the start of
the message to the trace file, and discards the data
beyond truncation_length. This enables you to record
the most important information for each message but
avoid filling up the file with long messages.
This parameter is optional. If it is not specified,
SNAplus2 does not truncate messages (all the data
from each message is written to the file).
fmi
The Registry data type of this value is
REG_SZ
.
To trace 3270 messages, set this parameter to
YES
;
otherwise, set it to
NO
. This parameter is optional. If it
is not specified, the default is
NO
.
CS_tracing
The
CS_tracing
subkey specifies options for client/server tracing
(tracing on messages between the client and SNAplus2 servers). For
more information about tracing, refer to HP-UX SNAplus2 Diagnostics
Guide. The tracing options are specified as follows:
file1
The Registry data type of this value is
REG_SZ
.
The full path name of the trace file, or of the first trace
file if tracing is to two files (see the description of the
file2 parameter).
This parameter is required if you want to enable
client/server tracing; you also need to set the
trace_flags parameter.
file2