manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual

The HP HP-UX SNAplus2 Administration Manual is a comprehensive guide that provides step-by-step instructions for effectively managing and leveraging the features of this powerful product. Available for free download from manualshive.com, this manual equips users with invaluable knowledge to optimize their experience with the HP-UX SNAplus2 software.

Share
Download
background image

82

Chapter 2

Introduction to SNAplus2

SNAplus2 Components

APPC API

An APPC application uses the node's LU type 6.2 resources to
communicate with another APPC or CPI-C application on a host or peer
computer, using a specified mode. The APPC API includes TP server
support, enabling applications to have greater control over starting
transaction programs (TPs) and distributing conversations to those TPs.

If the TP on the SNAplus2 computer is the invoking TP (the TP that
starts the APPC conversation), the additional node resources required
depend on the APPC features used by the TP, and on the type of remote
system it is communicating with:

• If the local node or the remote system with which the TP

communicates is a LEN node, you need to define directory entries for
the remote node and its LUs.

• If the TP specifies its local APPC LU using an LU alias, you need to

define the partner LU in order to associate this alias with a fully
qualified LU name.

• If the TP uses a dependent local LU to communicate with a host, you

need a partner LU definition on the local node that specifies the
uninterpreted name for the LU on the host. When the TP requests a
conversation from the local LU, the local LU sends the host a session
initialization request that contains the uninterpreted name for the
host LU.

In the Motif administration program, directory entries and partner LUs
are not shown explicitly, but are included under the “Remote Systems”
heading in the Node window for the local node.

If the TP on the SNAplus2 computer is the invoked TP (the TP that
accepts a conversation started by the invoking TP), the additional
resources required depend on the APPC features used by the TP, and on
how it is to be started:

• To restrict the TP to using particular options for conversation

security, confirm synchronization, or conversation type (mapped or
basic), or to restrict the number of instances of the TP that can be
running at any time, you must define the TP as a node resource.

• To start the TP automatically when another TP requests a

conversation with it, you must provide the information that
SNAplus2 needs to start the TP. For more information, see Chapter 7,
“Configuring APPC Communication.”

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for HP-UX SNAplus2

H3C S3100 Series Operation Manual preview
S3100 Series
Brand: H3C Pages: 1057
Panasonic BL-C20 Troubleshooting Manual preview
BL-C20
Brand: Panasonic Pages: 18
3Com OfficeConnect 1600 Datasheet preview
OfficeConnect 1600
Brand: 3Com Pages: 8
3Com 3CRWEASY96A Quick Start Manual preview
3CRWEASY96A
Brand: 3Com Pages: 8
Accelerated 6330-MX User Manual preview
6330-MX
Brand: Accelerated Pages: 10
Accelerated 6300-CX Customer Setup Instructions preview
6300-CX
Brand: Accelerated Pages: 4
Fortinet FortiAP S311C Quick Start Manual preview
FortiAP S311C
Brand: Fortinet Pages: 20
NETGEAR AC1450 Installation Manual preview
AC1450
Brand: NETGEAR Pages: 14
Multitech MultiConnect SE MTS2EA Specification Sheet preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 2
Orolia Seven Solutions WR-ZEN Series User Manual preview
Seven Solutions WR-ZEN Series
Brand: Orolia Pages: 167
TP-Link TL-MR3220 Quick Installation Manual preview
TL-MR3220
Brand: TP-Link Pages: 87
IndigoVision Compact NVR-AS 4000 User Manual preview
Compact NVR-AS 4000
Brand: IndigoVision Pages: 38
Cabletron Systems MMAC-Plus 9G536-04 User Manual preview
MMAC-Plus 9G536-04
Brand: Cabletron Systems Pages: 42
3Com 3C433279A Release Note preview
3C433279A
Brand: 3Com Pages: 12
Tripp Lite N308-15M Specification Sheet preview
N308-15M
Brand: Tripp Lite Pages: 2
Tripp Lite N306-30M Specification Sheet preview
N306-30M
Brand: Tripp Lite Pages: 2
Emerson dixell Quick Start Manual preview
dixell
Brand: Emerson Pages: 8
Emerson Liebert NXL 250 Installation Manual preview
Liebert NXL 250
Brand: Emerson Pages: 36

Brands by name

Popular brands

Load more brands