manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual

The HP HP-UX SNAplus2 Administration Manual is a comprehensive guide that provides step-by-step instructions for effectively managing and leveraging the features of this powerful product. Available for free download from manualshive.com, this manual equips users with invaluable knowledge to optimize their experience with the HP-UX SNAplus2 software.

Share
Download
background image

220

Chapter 8

Configuring User Applications

Configuring RJE Workstations

Configuring RJE Workstations

You can define an RJE workstation to submit jobs to a host computer for
processing. The RJE workstation also handles the output returned by
the host.

NOTE

You must configure at least one RJE LU before defining an RJE
workstation.

To configure an RJE workstation, use one of the following methods:

Motif administration program

Select

RJE Workstations

 on the

Windows

 menu on

the Node window.

Command-line administration program

Issue the following command:

define_rje_wkstn

RJE Workstation Configuration Parameters

The following parameters are required for RJE workstation
configuration:

Workstation name

A name by which users can identify the RJE
workstation (for example, when they start the
workstation or submit jobs). The workstation name
must be 1–4 characters long.
You may find it helpful to use the workstation name
that is defined on the host computer, but it is not
necessary to do this.

Run on computer

The name of the HP-UX system on which the RJE
workstation runs. If you do not supply this value, the
workstation can run on any computer.

UNIX user name

The HP-UX system user name of the primary user of
the RJE workstation. The user must be a valid user of
the HP-UX system on which the RJE workstation runs.

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for HP-UX SNAplus2

Watchguard AP200 Setup Manual preview
AP200
Brand: Watchguard Pages: 40
QNO 2WAN 3LAN User Manual preview
2WAN 3LAN
Brand: QNO Pages: 106
Face XR18 User Manual preview
XR18
Brand: Face Pages: 8
Planet GSW-1602SF User Manual preview
GSW-1602SF
Brand: Planet Pages: 20
FOR-A USF-105AS Operation Manual preview
USF-105AS
Brand: FOR-A Pages: 39
Techroutes TSR 2800-30 Hardware Installation Manual preview
TSR 2800-30
Brand: Techroutes Pages: 20
CalAmp Viper 100 User Manual preview
Viper 100
Brand: CalAmp Pages: 115
TP-Link TD-VG5612 Quick Installation Manual preview
TD-VG5612
Brand: TP-Link Pages: 2
Meinberg IMS LANTIME M1000 Manual preview
IMS LANTIME M1000
Brand: Meinberg Pages: 134
Helmholz 700-160-3EN02 Quick Start Manual preview
700-160-3EN02
Brand: Helmholz Pages: 14
Xtatix XCA-PDSI User Manual preview
XCA-PDSI
Brand: Xtatix Pages: 12
Niveo Professional NR-10 User Manual preview
NR-10
Brand: Niveo Professional Pages: 49
Oracle Database Appliance X6-2-HA Deployment And User'S Manual preview
Database Appliance X6-2-HA
Brand: Oracle Pages: 473
Moxa Technologies WDR-3124A User Manual preview
WDR-3124A
Brand: Moxa Technologies Pages: 94
Cambium Networks PTP 850E Installation Manual preview
PTP 850E
Brand: Cambium Networks Pages: 99
Mellanox Technologies SwitchX-2 MSX1024B-1BFS Installation Manual preview
SwitchX-2 MSX1024B-1BFS
Brand: Mellanox Technologies Pages: 31
Brother Network Card (Portuguese) Manual Do Utilizador preview
Network Card
Brand: Brother Pages: 251
MikroTik AP Staging Manual preview
AP
Brand: MikroTik Pages: 7

Brands by name

Popular brands

Load more brands