manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual

The HP HP-UX SNAplus2 Administration Manual is a comprehensive guide that provides step-by-step instructions for effectively managing and leveraging the features of this powerful product. Available for free download from manualshive.com, this manual equips users with invaluable knowledge to optimize their experience with the HP-UX SNAplus2 software.

Share
Download
background image

Chapter 10

237

Managing SNAplus2 from NetView

Using the Host NetView Program

Using the Host NetView Program

The SNAplus2 RCF operates in conjunction with the NetView program
at a host computer. The host must be running NetView Version 1 Release
2, or a later version; SNAplus2 does not support NetView Version 1
Release 1.

To use the NetView program, you need the following:

• Login ID and password for the host NetView program (contact your

host personnel for this information)

• Service point name for SNAplus2, defined at the host for the NetView

program (contact your host personnel for this information)

• DLC, port, and link station to access the host computer on which the

NetView program is running

You may want to test the RCF function by using 3270 emulation to
access NetView from SNAplus2 instead of accessing it directly from the
host. In this case, you also require the following:

• 3270 LU configured at the host

• 3270 session using this LU

Consult your host administrator to obtain the necessary configuration
information.

To access the NetView program, follow these steps:

Step 1. Ensure that the SNAplus2 software is started, using a domain

configuration file that includes a definition of RCF access parameters
(the

define_rcf_access

 record).

Step 2. If you are accessing the NetView program using 3270 emulation, start

the 3270 emulation program and activate the session to the host. (Refer
to HP-UX SNAplus2 3270/3179G Users Guide if necessary.)

Step 3. Follow the instructions given to you by the host administrator for

starting NetView and logging on. (The sequence of operations may vary
with different versions of NetView.)

Step 4. Issue SPCF or UCF commands as required.

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for HP-UX SNAplus2

D-Link Verizon DSL-2750B Connection Instructions preview
Verizon DSL-2750B
Brand: D-Link Pages: 2
D-Link DVA-2800 Quick Start Manual preview
DVA-2800
Brand: D-Link Pages: 4
Abocom MH200 Quick Installation Manual preview
MH200
Brand: Abocom Pages: 11
Abocom CWB1000 Quick Installation Manual preview
CWB1000
Brand: Abocom Pages: 19
Cambium Networks PTP 550 Series Quick Start Manual preview
PTP 550 Series
Brand: Cambium Networks Pages: 68
Cambium Networks PTP 820S Installation Manual preview
PTP 820S
Brand: Cambium Networks Pages: 110
BSS Audio EC-4B Installation Manual preview
EC-4B
Brand: BSS Audio Pages: 20
Idis DR-1508P Operation Manual preview
DR-1508P
Brand: Idis Pages: 85
i-MO OptiBond 210 C Series Hardware Installation Manual preview
OptiBond 210 C Series
Brand: i-MO Pages: 16
LevelOne NetCon FBR-1409TX User Manual preview
NetCon FBR-1409TX
Brand: LevelOne Pages: 88
Idis DR-2308P Quick Manual preview
DR-2308P
Brand: Idis Pages: 18
Ubiquiti UniFi AP PRO Quick Start Manual preview
UniFi AP PRO
Brand: Ubiquiti Pages: 20
Milesight Pro UR32 Quick Start Manual preview
Pro UR32
Brand: Milesight Pages: 15
TRENDnet TE100S8P - Fast Ethernet Switch (Spanish) Quick Installation Manual preview
TE100S8P - Fast Ethernet Switch
Brand: TRENDnet Pages: 11
Hamlet HRDSL512P4 Quick Start Manual preview
HRDSL512P4
Brand: Hamlet Pages: 11
TP-Link JetStream T2600G-28TS User Manual preview
JetStream T2600G-28TS
Brand: TP-Link Pages: 1136
FOR-A USF-105PS Operation Manuals preview
USF-105PS
Brand: FOR-A Pages: 37
TRENDnet TEG-S81g Quick Installation Manual preview
TEG-S81g
Brand: TRENDnet Pages: 7

Brands by name

Popular brands

Load more brands